Month: September 2020

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.249889-68-7,8-Chloro-2-methoxy-1,5-naphthyridine,as a common compound, the synthetic route is as follows.,249889-68-7

2-Phenyl-[1,8]naphthyridin-3-ol (57 mg), 8-chloro-2-methoxy-[1,5]naphthyridine (50 mg), and 4-dimethylaminopyridine (94 mg) were suspended in 1,2-dichlorobenzene (1.5 ml), and the suspension was stirred at 130C for 8 hr. The reaction mixture was cooled to room temperature, and an aqueous sodium hydrogencarbonate solution was added to the reaction mixture. The organic layer was extracted with chloroform, and the chloroform layer was then washed with water and saturated brine and was dried over anhydrous sodium sulfate. The solvent was removed by distillation under the reduced pressure, and the residue was purified by thin layer chromatography with a methanol-chloroform system to give the title compound (27 mg, yield 28%). 1H-NMR (CDCl3, 400 MHz): delta 3.68 (s, 3H), 7.15 (d, J = 9.0 Hz, 1H), 7.18 (d, J = 5.1 Hz, 1H), 7.40 – 7.42 (m, 3H), 7.46 (dd, J = 4.4, 8.3 Hz, 1H), 7.58 (s, 1H), 8.03 (dd, J = 2.0, 8.3 Hz, 1H), 8.32 (d, J = 9.3 Hz, 1H), 8.38 – 8.41 (m, 2H), 8.69 (d, J = 5.1 Hz, 1H), 9.10 (dd, J = 2.0, 4.1 Hz, 1H) Mass spectrometric value (ESI-MS, m/z): 403 (M+Na)+

As the paragraph descriping shows that 249889-68-7 is playing an increasingly important role.

Reference£º
Patent; KIRIN BEER KABUSHIKI KAISHA; EP1724268; (2006); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1309774-03-5,7-Bromo-2-chloro-1,5-naphthyridine,as a common compound, the synthetic route is as follows.

0607-2 A mixture of 7-bromo-2-chloro-1,5-naphthyridine (46 mg), 3-methyl-4-(3-(4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)-1H-pyrazol-1-yl)propyl)morpholine (64 mg), sodium carbonate (40 mg), bis(di-tert-butyl(4-dimethylaminophenyl)phosphine)dichloropalladium(II) (7 mg), 1,4-dioxane (5 mL), and water (1 mL) was stirred at 80 C. for 5 hour in a nitrogen atmosphere. The reaction mixture was cooled to room temperature, and the solvent was distilled off under reduced pressure. The obtained residue was purified by silica gel column chromatography (hexane-ethyl acetate-methanol), thereby obtaining 4-(3-(4-(6-chloro-1,5-naphthyridin-3-yl)-1H-pyrazol-1-yl)propyl)-3-methylmorpholine (77 mg). MS m/z (M+H): 372.

1309774-03-5, The synthetic route of 1309774-03-5 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; FUJIFILM Corporation; FURUYAMA, Hidetomo; KURIHARA, Hideki; TERAO, Takahiro; NAKAGAWA, Daisuke; TANABE, Shintaro; KATO, Takayuki; YAMAMOTO, Masahiko; SEKINE, Shinichiro; MASHIKO, Tomoyuki; INUKI, Shinsuke; UEDA, Satoshi; US2015/322063; (2015); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1569-16-0,2-Methyl[1,8]-Naphthyridine,as a common compound, the synthetic route is as follows.

A solution of selenium dioxide (8.61 g, 77.56 mmol) in 1 ,4 dioxane (140 mL) with 0.5 mL of water was stirred at 100 ¡ãC for 5 min. The mixture was cooled down to 0 ¡ãC and 2-Methyl- 1 ,8-naphthyridine (7 g, 48.5 mmol) was added dropwise. The mixture was heated again at 100 ¡ãC for 5 h. Completion of the reaction was monitored by TLC. The reaction mixture was filtered through celite bed, washed with EtOAc (50 mL) and concentrated. The resulting crude mixture was dissolved in EtOAc (150 mL) and washed with water (3 x 60 mL), brine (30 mL), dried over Na2SO4 and concentrated to give the title compound (brown solid). 1H NMR (300 MHz, DMSO-d6): delta 10.18 (s, 1 H), 9.28-9.27 (m, 1 H), 8.74 (d, J = 8.1 Hz, 1 H), 8.63 (d, J = 8.1 Hz, 1 H), 8.1 1 (dd, J = 8.4, 1.2 Hz, 1 H), 7.83-7.79 (m, 1 H). LCMS: (Method B) 159.0 (M +H), Rt. 2.44 min, 91.59percent (Max). HPLC: (Method B) Rt 2.41 min, 87.86percent (Max)., 1569-16-0

As the paragraph descriping shows that 1569-16-0 is playing an increasingly important role.

Reference£º
Patent; ASCENEURON S. A.; QUATTROPANI, Anna; KULKARNI, Santosh, S.; GIRI, Awadut Gajendra; (247 pag.)WO2017/144639; (2017); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.96568-07-9,Ethyl 7-chloro-1-cyclopropyl-6-fluoro-4-oxo-1,4-dihydro-1,8-naphthyridine-3-carboxylate,as a common compound, the synthetic route is as follows.,96568-07-9

EXAMPLE 52 Ethyl (1’RS,2’RS,6’RS)-1-cyclopropyl-7-(2′-ethyloxycarbonylaminomethyl-8′-azabicyclo[4.3.0]non-4′-en-8′-yl)-6-fluoro-1,4-dihydro-4-oxo-1,8-naphthyridine-3-carboxylate STR192 A mixture consisting of 828 mg (2.6 mmol) of ethyl 7-chloro -1-cyclopropyl-6-fluoro-1,4-dihydro-4-oxo-1,8-naphthyridine-3-carboxylate, 900 mg (4 mmol) of the product from Example K and 20 ml of acetonitrile is stirred at room temperature for three days. Subsequently, insoluble components are filtered off with suction and the solution is concentrated in vacuo. The crude product is purified by chromatography (eluent: dichloromethane/ methanol/conc. ammonia 15:4:0.5). Yield: 700 mg (56% of theory). 1 H-NMR (DMSO-d3): 8.36 (s, 1H, 2-H); 7.81 (d, 1H, 5-H); 7.21 (t, 1H, carbamate-NH); 5.73; 5.67 (2m, 2x 1H, HC=CH); 4.20; 3.99 (2q, 2x 2H, 2x ethyl-CH2); 3.86 (m, 1H); 3.78 (m, 1H); 3.56 (m, 2H); 3.13-3.01 (m, 2H); 2.89 (m, 1H); 2.35 (m, 1H); 2.18 (m, 2H); 1.88 (m, 2H); 1.26;-1.19 (2t, 2x 3H, 2x ethyl-CH3); 1.02; 0.88 ppm (2x H, 4x cyclopropyl-H).

96568-07-9 Ethyl 7-chloro-1-cyclopropyl-6-fluoro-4-oxo-1,4-dihydro-1,8-naphthyridine-3-carboxylate 0, anaphthyridine compound, is more and more widely used in various fields.

Reference£º
Patent; Bayer Aktiengesellschaft; US5556979; (1996); A;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.7689-62-5,2-Chloro-1,5-naphthyridine,as a common compound, the synthetic route is as follows.

7689-62-5, A solution of the compound 0001-2 (2.88 g) and sodium acetate (2.89 g) in acetic acid (15 mL) was stirred at 85C for 5 minutes. A solution of bromine (0.99 mL) in acetic acid (2.5 mL) was dropwise added thereto. Further acetic acid (2 mL) was added dropwise thereto, and the mixture was stirred at 85C for 3 hours. To a 6 M aqueous sodium hydroxide solution (60 mL) under stirring with ice-cooling, the reaction solution which had been cooled to room temperature was added dropwise. The precipitated solid was separated by filtration, and the solid was then suspended in methanol (5 mL), and thereafter subjected to sonication. Thereafter, the suspension was filtered, and then the resulting solid was washed with methanol (3 mL). The obtained solid was suspended in a 75 v/v% aqueous methanol solution (8 mL), subjected to sonication, and then the suspension was filtered, and the residue was then washed with a 75 v/v% aqueous methanol solution twice to obtain a compound 0001-3 (3.33 g) as a pale yellow solid. 1H-NMR (DMSO-d6) delta: 9.13 (1H, d), 8.77 (1H, dd), 8.53 (1H, dd), 7.91 (1H, d). MS m/z (M+H): 245.

The synthetic route of 7689-62-5 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; FUJIFILM Corporation; FURUYAMA, Hidetomo; KURIHARA, Hideki; FURUYA, Kentarou; TERAO, Takahiro; SEKINE, Shinichirou; NAKAGAWA, Daisuke; EP2727920; (2014); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

959558-28-2, 4-Bromo-2,7-naphthyridin-1-amine is a naphthyridine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

4-(1-Benzenesulfonyl-2-methyl-1H-pyrrolo[2,3-b]pyridin-3-yl)-2,7-naphthyridin-1-ylamine23.7 g of tripotassium phosphate and 3.2 g of trans-dichlorobis(tricyclohexyl-phosphine)palladium(II) are added to a solution of 12.5 g of 4-bromo-2,7-naphthyridin-1-ylamine in 400 ml of diglyme and 15 ml of water. The mixture is heated to 125, and 25 g of 1-(benzenesulfonyl)-2-methyl-3-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)-1H-pyrrolo[2,3-b]pyridine in 100 ml of diglyme are added dropwise over the course of 30 minutes. The mixture is stirred at 125 for 3 h, at room temperature for 20 h and the solvent is subsequently removed and the mixture is subjected to conventional work-up. The product is purified by means of flash chromatography over 330 g of silica with a methanol gradient in ethyl acetate with 200 ml/min with UV detection at 254 nm, giving a pure fraction (5.1 g) and a contaminated fraction (6.5 g) of 4-(1-benzenesulfonyl-2-methyl-1H-pyrrolo[2,3-b]pyridin-3-yl)-2,7-naphthyridin-1-ylamine, M415.47 g/mol, M+H found 416., 959558-28-2

The synthetic route of 959558-28-2 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Merck Patent GmbH; Jonczyk, Alfred; Zenke, Frank T.; Amendt, Christiane; US2015/252041; (2015); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

1569-16-0, 2-Methyl[1,8]-Naphthyridine is a naphthyridine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

[00228] A solution of 2-methyl-l,8-naphthyridine (5.0 g, 34.7 mmol) in tetrahydrofuran (60 mL) was stirred at -78 ¡ãC and MeLi (2 M solution in tetrahydrofuran, 52 mL, 104 mmol) was added dropwise. The mixture was warmed to room temperature and stirred for 16 h. The reaction mixture was diluted with water (50niL), extracted with ether (3 x 50 rnL) and the combined the organic layers were dried over anhydrous sodium sulfate, concentrated under reduced pressure, and purified by flash chromatography eluting with ethyl acetate:petrol ether (1 : 10) to give the title compound as a white solid (4.55 g, 82percent). MS (ESI): m/z 161 [M + H]+.

1569-16-0, The synthetic route of 1569-16-0 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; SUNOVION PHARMACEUTICALS INC.; CAMPBELL, John Emmerson; JONES, Philip; WO2014/85284; (2014); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

1309774-03-5, 7-Bromo-2-chloro-1,5-naphthyridine is a naphthyridine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,1309774-03-5

0158-1 A mixture of 7-bromo-2-chloro-1,5-naphthyridine (100 mg), 5-(2-morpholinoethoxyl)pyridine-3-amine (92 mg), tris(dibenzylideneacetone)dipalladium(0) (37 mg), 4,5-bis(diphenylphosphino)-9,9-dimethylxanthene (47 mg), and cesium carbonate (267 mg) in 1,4-dioxane (2 mL) was stirred at 140 C. for 30 minutes using a microwave reaction apparatus. The reaction mixture was cooled to room temperature, the insolubles were filtered off using celite, and the obtained solution was purified by silica gel column chromatography (methanol-ethyl acetate, NH silica), thereby obtaining 6-chloro-N-(5-(2-morpholinoethoxyl)pyridin-3-yl)-1,5-naphthyridine-3-amine (5.4 mg). MS m/z (M+H): 386.

As the paragraph descriping shows that 1309774-03-5 is playing an increasingly important role.

Reference£º
Patent; FUJIFILM Corporation; FURUYAMA, Hidetomo; KURIHARA, Hideki; TERAO, Takahiro; NAKAGAWA, Daisuke; TANABE, Shintaro; KATO, Takayuki; YAMAMOTO, Masahiko; SEKINE, Shinichiro; MASHIKO, Tomoyuki; INUKI, Shinsuke; UEDA, Satoshi; US2015/322063; (2015); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.254-60-4,1,8-Diazanaphthalene,as a common compound, the synthetic route is as follows.

Step C: 2-Chloro-3-cyclopropyl-[1,8]naphthyridine (4-5). A mixture of naphthyridine 4-4 (14 g, 77 mmol) and 100 mL POCl3 and 0.1 mL DMF was refluxed at 120 C. for 3 hr and concentrated. The residue was treated with 300 mL ice-water and solid K2CO3 until pH=9. The mixture was extracted with ethyl acetate (*3), washed with brine and dried over MgSO4. After solvent removal, the desired compound 4-5 was obtained as a yellowish solid. 1H NMR (400 MHz, CDCl3): delta 9.00 (q, 1H), 8.10 (q, 1H), 7.78 (s, 1H), 7.50 (q, 1H), 2.34 (m, 1H), 1.00 (m, 2H), 0.82 (m, 2H)., 254-60-4

254-60-4 1,8-Diazanaphthalene 136069, anaphthyridine compound, is more and more widely used in various fields.

Reference£º
Patent; Merck & Co., Inc.; US6410526; (2002); B1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

100361-18-0, 7-Chloro-1-cyclopropyl-6-fluoro-1,4-dihydro-4-oxo-1,8-naphthyridine-3-carboxylic Acid is a naphthyridine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,100361-18-0

REFERENCE EXAMPLE 2 Synthesis of 7-(3-aminomethyl-4-methoxyimino-pyrrolidin-1-yl)-1-cyclopropyl-6-fluoro-4-oxo-1,4-dihydro[1,8]-naphthyridine-carboxylic acid (9) 141 mg (0.5 mmole) of 1-cyclopropyl-7-chloro-6-fluoro-4-oxo-1,4-dihydro[1,8]naphthyridine-3-carboxylic acid and 108 mg (0.5 mmole) of 3-aminomethylpyrrolidin-4-one O-methyloxime dihydrochloride were added to 2.5 ml of dry acetonitrile. Then, 230 mg (1.5 mmol) of 1,8-diazabicyclo[5.4.0]undec-7-ene was slowly added dropwise thereto and the mixture was heated for 0.5 hour and then cooled down to room temperature. 1 ml of distilled water was added to the reaction solution. The precipitated solid was separated and dried to obtain 167 mg (Yield: 85%) of the title compound.

As the paragraph descriping shows that 100361-18-0 is playing an increasingly important role.

Reference£º
Patent; LG Chemical, LTD; US6307059; (2001); B1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem