Month: September 2020

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1309774-03-5,7-Bromo-2-chloro-1,5-naphthyridine,as a common compound, the synthetic route is as follows.

0001-4 A mixture of 7-bromo-2-chloro-1,5-naphthyridine (30 mg), 1-(3-morpholinopropyl)-1H-pyrazole-4-boronic acid pinacol ester (59 mg), bis(di-tert-butyl(4-dimethylaminophenyl)phosphine)dichloropalladium(II) (5 mg) and sodium carbonate (20 mg) in 1,4-dioxane (1.9 mL) and water (0.1 mL) was stirred at 100 C. for 7.5 hours in a nitrogen atmosphere. The reaction mixture was cooled to room temperature, ethanol (4 mL) was added thereto, and the solvent was distilled off under reduced pressure. The obtained residue was purified by silica gel column chromatography (chloroform-ethyl acetate, NH silica), thereby obtaining 4-(3-(4-(6-chloro-1,5-naphthyridin-3-yl)-1H-pyrazol-1-yl)propyl)morpholine (45.6 mg) as a white solid. MS m/z (M+H): 358., 1309774-03-5

The synthetic route of 1309774-03-5 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; FUJIFILM Corporation; FURUYAMA, Hidetomo; KURIHARA, Hideki; TERAO, Takahiro; NAKAGAWA, Daisuke; TANABE, Shintaro; KATO, Takayuki; YAMAMOTO, Masahiko; SEKINE, Shinichiro; MASHIKO, Tomoyuki; INUKI, Shinsuke; UEDA, Satoshi; US2015/322063; (2015); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

253-72-5, 1,6-Naphthyridine is a naphthyridine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,253-72-5

2. 6-Benzyl-5,6,7,8-tetrahydro-1,6-naphthyridine 1,6-Naphthyridine (13.7 g, 105 mmol) and benzyl bromide (36.05 g, 210 mmol) were combined in acetonitrile (200 ml) and heated to reflux until no 1,6-naphthyridine was visible by thin layer chromatography. After removal of the solvent in vacuo, the residue was washed several times with ether and dissolved in methanol (700 ml). Water (250 ml) was added, and the solution cooled to 0¡ã; portionwise addition of sodium borohydride (20.8 g, 550 mmol) brought about vigorous gas evolution and a slight rise in temperature. The reaction mixture was allowed to warm to room temperature and stir for 18 hours. The solvent was then removed in vacuo and the residue partitioned between water (750 ml) and methylene chloride (300 ml). The aqueous layer was extracted with additional methylene chloride (2*300 ml) and the combined organic extracts were washed once with water and once with saturated aqueous sodium chloride. Removal of solvent provided a dark amber foam, which was purified by column chromatography (99:1 methylene chloride:methanol) to yield the title product (12.1 g, 54 mmol, 51percent yield).

The synthetic route of 253-72-5 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Pfizer Inc.; US5037834; (1991); A;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

1309774-03-5, 7-Bromo-2-chloro-1,5-naphthyridine is a naphthyridine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,1309774-03-5

Example 0623 0623-1 A mixture of 7-bromo-2-chloro-1,5-naphthyridine (50 mg), tert-butyl carbamate (32 mg), tris(dibenzylideneacetone)dipalladium(0) (18 mg), 4,5-bis(diphenylphosphino)-9,9-dimethylxanthene (23 mg), cesium carbonate (187 mg), and 1,4-dioxane (4 mL) was stirred at 120 C. for 9 hours in a nitrogen atmosphere. The reaction mixture was cooled to room temperature, and the solvent was distilled off under reduced pressure. The obtained residue was purified by silica gel column chromatography (hexane-ethyl acetate-methanol), thereby obtaining tert-butyl (6-chloro-1,5-naphthyridin-3-yl)carbamate (47 mg). MS m/z (M+H): 280.

1309774-03-5 7-Bromo-2-chloro-1,5-naphthyridine 58310544, anaphthyridine compound, is more and more widely used in various fields.

Reference£º
Patent; FUJIFILM Corporation; FURUYAMA, Hidetomo; KURIHARA, Hideki; TERAO, Takahiro; NAKAGAWA, Daisuke; TANABE, Shintaro; KATO, Takayuki; YAMAMOTO, Masahiko; SEKINE, Shinichiro; MASHIKO, Tomoyuki; INUKI, Shinsuke; UEDA, Satoshi; US2015/322063; (2015); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

1569-16-0, 2-Methyl[1,8]-Naphthyridine is a naphthyridine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

In a 25 mL microwave reaction tube,Adding 2-methylnaphthyridine,Salicylaldehyde 0.5 g (4 mmol) and 10 ml acetic anhydride,Forming an orange-red solution,At a controlled temperature of 130 ¡ã C,Microwave power 50W, microwave reaction 40min,With the thin layer of the reaction process to monitor;After the reaction,The solvent was concentrated under reduced pressure to remove acetic anhydride,Oil-like viscous liquid,Dissolved with hot ethanol,Then recrystallized from acetone,Precipitation of yellow powder,That is, 2- (2′-hydroxystyryl) naphthyridine probe reagent,Yield 35percent.

1569-16-0, 1569-16-0 2-Methyl[1,8]-Naphthyridine 74073, anaphthyridine compound, is more and more widely used in various fields.

Reference£º
Patent; Guizhou University; Ceng, Xi; Ruan, Qin; Mou, Lan; Li, Zhao; Zhang, Hong; (29 pag.)CN106045996; (2016); A;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.7689-62-5,2-Chloro-1,5-naphthyridine,as a common compound, the synthetic route is as follows.,7689-62-5

2-chloro- 1 ,5-naphthyridine ( 10- 1 ) (35 g, 213 mmol) in toluene (420 mL) was treated with tributyl(vinyl)stannane (101 g, 93.4 mL, 319 mmol) and tetrakis( phenylphosphine)palladium (36.9 g, 31.9 mmol). The mixture was heated at 140 C under microwave irradiation for 20 min, then cooled and concentrated in vacuo. The residue was purified by silica gel flash column chromatography, eluting with 0-100% EtO Ac/heptane. The fractions containing the desired product (10-2) were pooled, and after solvent removal in vacuo, 19 g (57%) of the product were obtained. LC/MS: m/z (M+H) = 157.2.

7689-62-5 2-Chloro-1,5-naphthyridine 15153031, anaphthyridine compound, is more and more widely used in various fields.

Reference£º
Patent; MERCK SHARP & DOHME CORP.; BARROW, James, C.; COX, Christopher, D.; NOLT, Mark, B.; SHIPE, William, D.; WO2013/74390; (2013); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1309774-03-5,7-Bromo-2-chloro-1,5-naphthyridine,as a common compound, the synthetic route is as follows.

0390-7 A mixture of 7-bromo-2-chloro-1,5-naphthyridine (29 mg), bis(pinacolato)diboron (36 mg), (1,1′-bis(diphenylphosphino)ferrocene)palladium(II) dichloride (10 mg), potassium acetate (23 mg), and 1,4-dioxane (1 mL) was stirred at 80 C. for 2 hours in a nitrogen atmosphere. 4-(3-(4-iodo-3-propyl-1H-pyrazol-1-yl)propyl)morpholine (43 mg), sodium carbonate (25 mg), bis(di-tert-butyl(4-dimethylaminophenyl)phosphine)dichloropalladium(II) (8 mg), and water (0.1 mL) were added thereto, followed by stirring at 80 C. for 3 hours. The reaction mixture was cooled to room temperature, the insolubles were filtered off using celite, and the solvent was distilled off under reduced pressure. The obtained residue was purified by silica gel column chromatography (methanol-ethyl acetate, NH silica), thereby obtaining 4-(3-(4-(6-chloro-1,5-naphthyridin-3-yl)-3-propyl-1H-pyrazol-1-yl)propyl)morpholine (11 mg). MS m/z (M+H): 400.

1309774-03-5, As the paragraph descriping shows that 1309774-03-5 is playing an increasingly important role.

Reference£º
Patent; FUJIFILM Corporation; FURUYAMA, Hidetomo; KURIHARA, Hideki; TERAO, Takahiro; NAKAGAWA, Daisuke; TANABE, Shintaro; KATO, Takayuki; YAMAMOTO, Masahiko; SEKINE, Shinichiro; MASHIKO, Tomoyuki; INUKI, Shinsuke; UEDA, Satoshi; US2015/322063; (2015); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1260670-05-0,3-Bromo-8-chloro-1,7-naphthyridine,as a common compound, the synthetic route is as follows.,1260670-05-0

To a solution of 3-bromo-8-chloro-1, 7-naphthyridine (2.43g) in toluene (30mL) , EtOH (10mL) , and 10%Na2CO3aq. (10mL) Pd (dppf) Cl2.DCM (420mg) was added. 4, 4, 5, 5-tetramethyl-2-vinyl-1, 3, 2-dioxaborolane (3.1g) was added dropwise under N2protection. The mixture was allowed to stir at 100 for 16 h. The reaction was quenched by H2O (50mL) and extracted by EtOAc for 3 times. Organic layer was combined and washed with brine. The resulting solution was concentrated and purified by silicagel (eluting with hexane-EtOAc using a gradient from 8: 1 to 5: 1) to afford 8-chloro-3-vinyl-1, 7-naphthyridine (1.1g) as a brown solid.

1260670-05-0 3-Bromo-8-chloro-1,7-naphthyridine 72213592, anaphthyridine compound, is more and more widely used in various fields.

Reference£º
Patent; BETTA PHARMACEUTICALS CO., LTD; WANG, Yiqian; FU, Bang; ZHANG, Yao; LIU, Xiangyong; WANG, Jiabing; DING, Lieming; (103 pag.)WO2019/192506; (2019); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.7689-62-5,2-Chloro-1,5-naphthyridine,as a common compound, the synthetic route is as follows.,7689-62-5

200 mg of compound 31, 200 mg of compound 6a, and 350 mg of DIEA were suspended in 10 ml of NMP, and heated to 150 C. and stirred for 1 h. After the TLC detection reaction was completed, cooled, added 40 ml of water, and extracted twice with ethyl acetate. The organic phases were combined, washed with water, dried, and purified by TLC (petroleum ether: ethyl acetate = 1: 1) to obtain 250 mg of intermediate 32.

The synthetic route of 7689-62-5 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Beijing Fulong Kangtai Biological Co., Ltd.; Ji Qi; Gao Congmin; Wang Lei; Gong Longlong; Chen Bo; Du Zhenjian; (21 pag.)CN110857304; (2020); A;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.10273-40-2,2,7-Naphthyridine-4-carbaldehyde,as a common compound, the synthetic route is as follows.,10273-40-2

General procedure: To an indole-3-acetonitrile derivative (1.0 equiv) dissolved in anhydrous methanol (4mL for 2.31mmol of starting material) in a dried microwave vial, sodium methoxide (1.7 equiv) was added and stirred at room temperature for 15min protected from light. Quinoline/isoquinoline-carboxaldehyde derivative (1.2 equiv) was added and the mixture was subjected to microwave irradiation at 95C for 8.5min. The reaction was cooled to room temperature and then chilled in an ice/salt bath. The resulting precipitate was filtered, washed with methanol, and dried under vacuum to afford a solid as the product.

10273-40-2 2,7-Naphthyridine-4-carbaldehyde 11480583, anaphthyridine compound, is more and more widely used in various fields.

Reference£º
Article; See, Cheng Shang; Kitagawa, Mayumi; Liao, Pei-Ju; Lee, Kyung Hee; Wong, Jasmine; Lee, Sang Hyun; Dymock, Brian W.; European Journal of Medicinal Chemistry; vol. 156; (2018); p. 344 – 367;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.337958-60-8,5,7-Dichloro-1,6-naphthyridine,as a common compound, the synthetic route is as follows.,337958-60-8

Intermediate 8: 1,1-Dimethylethyl (3R)-3-{[(7-chloro-1,6-naphthyridin-5-yl)amino]methyl}-3-fluoro-1-piperidinecarboxylate[0387]5,7-dichloro-1,6-naphthyridine (5.01 g, 25.2 mmol) and 1,1-dimethylethyl (3R)-3-(aminomethyl)-3-fluoro-1-piperidinecarboxylate (5.32 g, 22.90 mmol) in NMP (20 ml) was added DIPEA (8.00 ml, 45.8 mmol) and the mixture was stirred at 100 C. for 72 h under nitrogen. The reaction was cooled and partitioned between ethyl acetate and water (200 ml each). The aqueous was washed with ethyl acetate. The combined organics were washed with water and the solvent was removed. The residue was dissolved in DCM and loaded onto a 100 g silica SNAP column and purified on the SP4 eluting with 0-50% ethyl acetate in cyclohexane over 17 CVs. Appropriate fractions were combined and the solvent was removed to give the title compound as a pale orange solid which was dried under high vacuum for 2 h (7.61 g).[0389]LCMS (Method B): Rt=1.12 min, MH+ 395/397

As the paragraph descriping shows that 337958-60-8 is playing an increasingly important role.

Reference£º
Patent; GLAXO GROUP LIMITED; Atkinson, Francis Louis; Barker, Michael David; Douault, Clement; Garton, Neil Stuart; Liddle, John; Patel, Vipulkumar Kantibhai; Preston, Alexander George Steven; Wilson, David Matthew; US2013/40984; (2013); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem