Month: November 2020

As a common heterocyclic compound, it belong naphthyridine compound,2-Methyl[1,8]-Naphthyridine,1569-16-0,Molecular formula: C9H8N2,mainly used in chemical industry, its synthesis route is as follows.,1569-16-0

STEP 2. SYNTHESIS OF (E)-1-ETHOXY-2- (1, 8-NAPHTHYRIDIN-2- YL) ethanol. To the product from step 1, (81.5 G, 0.57 mol) in anhydrous THF (1.9 L) at – 40 C under Ar gas was added lithium bis (trimethylsilyl) amide (1 M in THF, 1.2 L, 1.2 MOL). After stirring for 30 min at-40 C, DIETHYLCARBONATE (72.5 mL, 0.60 mol) was added. The temperature of the reaction mixture was warmed up to 0 C and stirred for 2 h. The reaction mixture was quenched into saturated aq. NH4CI (700 mL) and the THF removed under reduced pressure. The resulting mixture was extracted with EtOAc (3 x 700 mL). The organic layers were combined, washed with brine, dried over NA2SO4, and concentrated under reduced pressure. The resulting residue was purified by flash column chromatography using 50percent EtOAc/hexane to give a yellow solid (81.2 g, 0.38 mol, 66percent).APOS;H NMR (400 MHz, DMSO-d6) 8 1.22 (t, 3H), 4.11 (q, 2H), 4.89 (s, 1H), 6.78 (d, 1H), 7.15 (dd, 1H), 7.47 (d, 1H), 7.80 (d, 1H), 8.36 (d, 1H), 11.8 (bs, 1H). LC-MS (MH+) = 217.

With the synthetic route has been constantly updated, we look forward to future research findings about 2-Methyl[1,8]-Naphthyridine,belong naphthyridine compound

Reference£º
Patent; PHARMACIA CORPORATION; WO2004/58761; (2004); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

Name is 1,5-Naphthyridin-2(1H)-one, as a common heterocyclic compound, it belongs to naphthyridine compound, and cas is 10261-82-2, its synthesis route is as follows.,10261-82-2

0001-2 Phosphorus oxychloride (8.3 mL) was added to 1,5-naphthyridin-2-ol (2.76 g), followed by stirring at 100 C. for 5 hours. The reaction mixture was cooled to room temperature, and added dropwise to a mixture of ethyl acetate (30 mL), water (30 mL), and sodium carbonate (9.57 g) over a period of 1 hour in an ice bath. Water (10 mL) was added thereto, and sodium carbonate was added thereto, followed by adjusting the pH of the resultant product to 8.3. The resultant product was stirred at room temperature for 10 minutes, and ethyl acetate (270 mL) and water (200 mL) were added thereto. The organic layer was collected by separation, and the aqueous layer was extracted two times with ethyl acetate (200 mL). The organic layer and the extraction liquid were combined, the resultant product was dried over anhydrous sodium sulfate, and the solvent was distilled off under reduced pressure, thereby obtaining 2-chloro-1,5-naphthyridine (2.86 g) as a pale yellow solid. MS m/z (M+H): 165.

With the complex challenges of chemical substances, we look forward to future research findings about 1,5-Naphthyridin-2(1H)-one

Reference£º
Patent; FUJIFILM Corporation; FURUYAMA, Hidetomo; KURIHARA, Hideki; TERAO, Takahiro; NAKAGAWA, Daisuke; TANABE, Shintaro; KATO, Takayuki; YAMAMOTO, Masahiko; SEKINE, Shinichiro; MASHIKO, Tomoyuki; INUKI, Shinsuke; UEDA, Satoshi; US2015/322063; (2015); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.35170-94-6,4-Chloro-1,8-naphthyridine,as a common compound, the synthetic route is as follows.,35170-94-6

To a solution of 0.5 g (3.04 mmol) of 4-chloro-[1,8]naphthyridine in 10 mL of DMF was added 0.39 g (6.08 mmol) of NaN3. The mixture was stirred for 5 h at 60C. The reaction was allowed to cool to roomtemperature and diluted with 300 ml. of EtOAc, washed with water, brine and dried over Na2SO4. The desiccant was filtered off and the solvents were evaporated under vacuum to give 0.5 g of 4-azido-1,8- naphthyridine as a light brown solid.To a solution of 0.5 g (2.92 mmol) of 4-azido-1,8-naphthyridine in 30 mL of THF was added 100mg of 10% Pd/C. The mixture was hydrogenated at 30C under atmospheric pressure for 5 h. The catalyst wasremoved by filtration. The solvent was evaporated to give 420 mg of 1 ,8-naphthyridin-4-amine a crude product as a light brown solid.To a solution of 0.42 g (2.89 mmol) of 1,8-naphthyridin-4-amine in 50 mL of DCM were added 0.64 g (2.89 mmol) of Boc2O, 0.11 g (0.87 mmol) of DMAP and 1.43 mL (8.68 mmol) of DIPEA and then the mixture was stirred at 30C for 16 h. The solvent was removed under vacuum and the residue waspurified by column chromatography eluting with DCM/MeOH (20/1, R1= 0.4) to give 350mg of tertbutyl N-(1 ,8-naphthyridin-4-yl)carbamate as a brown solid.A suspension of 280mg (1.14 mmol) of tert-butylN-(1,8-naphthyridin-4-yl)carbamate and 164 mg (0.12 mmol) of NaH in 2 ml. of THF was stirred at 40C for 16 h. A solution of 0.04 g (0.13 mmol) of 4- bromo-6-(bromomethyl)isoquinoline in 2 mL of THF was added thereto at 3 5C. The mixture was stirredat 35C for additional 0.5 h. The reaction was quenched with saturated aqueous NH4C1 solution. The mixture was diluted with EtOAc and washed with brine. The organic layer was dried over Na2SO4, filtered and concentrated to give the product as a light brown semisolid which was purified by preparative HPLC to give 140 mg of tert-butyl N-[l- [(4-bromo-6-isoquinolyl)methyl] -1, 8-naphthyridin- 1 -ium-4- yl]carbamate as a light brown solid.MS (+ESI): 465.0, 467.0 [M+H].?H NMR (400 MHz, DMSO-d6+ D20) ppm: 9.23 (s, 1H), 9.04 (m, 2H), 8.68 (s, 1H), 8.25 (d, J 8.0 Hz, 1H), 8.13 (d, J= 8.8 Hz, 1H), 7.94 (s, 1H), 7.66 (m, 2H), 7.55 (d, J= 4.8 Hz, 1H), 5.25 (br s, 2H), 1.27 (s, 9H).

As the paragraph descriping shows that 35170-94-6 is playing an increasingly important role.

Reference£º
Patent; BASILEA PHARMACEUTICA AG; POHLMANN, Jens; STIEGER, Martin; REINELT, Stefan; LANE, Heidi; (286 pag.)WO2016/128465; (2016); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

Name is 6-Amino-8-bromo-1,7-naphthyridine, as a common heterocyclic compound, it belongs to naphthyridine compound, and cas is 5912-35-6, its synthesis route is as follows.,5912-35-6

To a stirred solution of 6-amino-8-bromo-1, 7-naphthyridine (0.5 g) in a mixture of toluene (2.5 ml), DMF (4 ml) and aqueous KZCOS (0.68 g in 2 ml water) is added bis (dibenzylideneacetone) palladium (51 mg), triphenylphosphine (47 mg) and 3- fluorophenylboronic acid (0.33 g). The mixture is stirred for 4 hours at 100C. The mixture is diluted with ethyl acetate, then filtered through a CeliteTM filter. The ethyl acetate solution is washed with 2 N NAOH and water, dried over magnesium sulphate, then concentrated to afford the title compound. MS: APCI 240.0 MH+.

With the complex challenges of chemical substances, we look forward to future research findings about 6-Amino-8-bromo-1,7-naphthyridine

Reference£º
Patent; NOVARTIS AG; NOVARTIS PHARMA GMBH; WO2004/55013; (2004); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

As a common heterocyclic compound, it belongs to naphthyridine compound, name is 2-Methyl[1,8]-Naphthyridine, and cas is 1569-16-0, its synthesis route is as follows.,1569-16-0

A stirred solution of 2-methyl-l,8-naphthyridine (57.5 g, 399 mmol) (available from Manchester Organics) and ( ?)-fe/ -butyl 3-(iodomethyl)pyrrolidine-l-carboxylate (124.2 g, 399 mmol) (Intermediate 1) in THF (1 L) was cooled to 0 ¡ãC and treated under nitrogen with a solution of lithium bis(trimethylsilyl)amide in THF (1M, 399 ml_, 399 mmol) over 20 min and the reaction mixture was stirred at 0 ¡ãC for 3 h. The reaction was quenched with saturated ammonium chloride solution (500 ml.) and water (500 ml.) and ethyl acetate (1 L) was added. The layers were separated and the aqueous phase was extracted with further ethyl acetate (1 L). The combined organic layers were dried (MgS04), filtered and evaporated in vacuo. The residual brown oil (162 g) was purified by chromatography on a silica cartridge (750 g) eluting with a gradient of 0 – 100 percent [ethyl acetate in (5percent MeOH – 95 percent ethyl acetate)] over 8 column volumes. The appropriate fractions were combined and evaporated in vacuo to give the title compound (46.65 g, 36percent) as an orange solid: LCMS (System A) RT = 0.99 min, 97percent, ES+ve m/z 32S (M+H)+, [a]D20 = + 22 (c 1.00 in EtOH).

With the complex challenges of chemical substances, we look forward to future research findings about 1569-16-0,belong naphthyridine compound

Reference£º
Patent; GLAXOSMITHKLINE INTELLECTUAL PROPERTY DEVELOPMENT LIMITED; ANDERSON, Niall Andrew; FALLON, Brendan John; PRITCHARD, John Martin; WO2014/154725; (2014); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

As a common heterocyclic compound, it belongs to naphthyridine compound, name is 7-Bromo-2-chloro-1,5-naphthyridine, and cas is 1309774-03-5, its synthesis route is as follows.,1309774-03-5

0490-1 A suspension of 7-bromo-2-chloro-1,5-naphthyridine (183 mg), bis(pinacolato)diboron (190 mg), (1,1′-bis(diphenylphosphino)ferrocene)palladium(II) dichloride (46 mg), and potassium acetate (147 mg) in 1,4-dioxane (2 mL) was stirred at 100 C. for 1 hour in a nitrogen atmosphere. tert-Butyl 3-(4-bromo-1H-pyrazol-1-yl)azetidine-1-carboxylate (151 mg), sodium carbonate (106 mg) and bis(di-tert-butyl(4-dimethylaminophenyl)phosphine)dichloropalladium(II) (18 mg) were added to the reaction mixture, followed by stirring at 110 C. for 1 hour. After the reaction mixture was cooled to room temperature, ethyl acetate and water were added thereto. The organic layer was collected by separation, washed with a saturated sodium chloride aqueous solution, and dried over anhydrous sodium sulfate, and the solvent was distilled off under reduced pressure. The obtained residue was purified by silica gel column chromatography (ethyl acetate-hexane), thereby obtaining tert-butyl 3-(4-(6-chloro-1,5-naphthyridin-3-yl)-1H-pyrazol-1-yl)azetidine-1-carboxylate (63 mg) as a white solid. MS m/z (M+H): 386.

With the complex challenges of chemical substances, we look forward to future research findings about 1309774-03-5,belong naphthyridine compound

Reference£º
Patent; FUJIFILM Corporation; FURUYAMA, Hidetomo; KURIHARA, Hideki; TERAO, Takahiro; NAKAGAWA, Daisuke; TANABE, Shintaro; KATO, Takayuki; YAMAMOTO, Masahiko; SEKINE, Shinichiro; MASHIKO, Tomoyuki; INUKI, Shinsuke; UEDA, Satoshi; US2015/322063; (2015); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

As a common heterocyclic compound, it belongs to quinuclidine compound,Quinuclidine-4-carboxylic acid hydrochloride,40117-63-3,Molecular formula: C8H14ClNO383,mainly used in chemical industry, its synthesis route is as follows.,100361-18-0

A SOLUTION OF AMINE 31 (612 MG, 1.57 MMOL) and triethylamine (0.7 mL, 5.0 MMOL) in ACETONITRILE (4 mL) was treated with 7-CHLORO-1-CYCLOPROPYL-6-FLUORO-4-OXO-1, 4-dihydro-naphthpyridine- 3-carboxylic acid (222 mg, 0.787 MMOL) under nitrogen and the reaction mixture was allowed to stir for 12 h. The resulting mixture was concentrated in vacuo, and the residue was washed with water (3 X 10 mL). The residue was allowed to dry for 15 min. The solid was collected, resuspended in methanol (5 mL) and the reaction mixture was treated with hydrazine (1 mL). After 5 min, the reaction mixture was warmed to reflux and the resulting mixture was allowed to stir for 1 h. The reaction mixture was concentrated in vacuo, diluted with water and the solids were collected by filtration. The off white product was washed with water (3 x 20 mL), allowed to dry overnight to afford the title compound 1 (40.4 mg, 13%). MS 391 (M+H).

With the synthetic route has been constantly updated, we look forward to future research findings about 7-Chloro-1-cyclopropyl-6-fluoro-1,4-dihydro-4-oxo-1,8-naphthyridine-3-carboxylic Acid,belong naphthyridine compound

Reference£º
Patent; JANSSEN PHARMACEUTICA, N.V.; WO2005/33108; (2005); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

As a common heterocyclic compound, it belongs to naphthyridine compound, name is Ethyl 7-chloro-1-(2,4-difluorophenyl)-6-fluoro-4-oxo-1,4-dihydro-1,8-naphthyridine-3-carboxylate, and cas is 100491-29-0, its synthesis route is as follows.,100491-29-0

EXAMPLE 1 Ethyl 7-chloro-1-(2,4-difluoro-5-nitrophenyl)-6-fluoro-1,4-dihydro-4-oxo-1,8-naphthyridine-3-carboxylate To 8 ml of conc. sulfuric acid was added 2.00 grams of ethyl 7-chloro-1-(2,4-difluorophenyl)-6-fluoro-4-oxo-1,4-dihydro-1,8-naphthyridine-3-carboxylate. With ice cooling and stirring, to the solution was added 600 mg of potassium nitrate in portions. The solution was stirred at room temperature for 30 minutes to complete nitration. Then the reaction solution was poured into a stirred mixture of 150 ml of chloroform and 100 ml of ice water. After stirring at room temperature for 15 minutes, the reaction solution separated. The chloroform layer was dried over anhydrous magnesium sulfate and then concentrated in vacua. The precipitated crystals were dispersed in ethanol, collected by filtration and washed with ethanol and then with diisopropyl ether to give 2.08 g of the title compound.

With the complex challenges of chemical substances, we look forward to future research findings about 100491-29-0,belong naphthyridine compound

Reference£º
Patent; Wakunaga Seiyaku Kabushiki Kaisha; US5910498; (1999); A;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

8-Chloro-2-methoxy-1,5-naphthyridine, cas is 249889-68-7, it is a common heterocyclic compound, the naphthyridine compound, its synthesis route is as follows.

2-Phenyl-[1,8]naphthyridin-3-ol (57 mg), 8-chloro-2-methoxy-[1,5]naphthyridine (50 mg), and 4-dimethylaminopyridine (94 mg) were suspended in 1,2-dichlorobenzene (1.5 ml), and the suspension was stirred at 130C for 8 hr. The reaction mixture was cooled to room temperature, and an aqueous sodium hydrogencarbonate solution was added to the reaction mixture. The organic layer was extracted with chloroform, and the chloroform layer was then washed with water and saturated brine and was dried over anhydrous sodium sulfate. The solvent was removed by distillation under the reduced pressure, and the residue was purified by thin layer chromatography with a methanol-chloroform system to give the title compound (27 mg, yield 28%). 1H-NMR (CDCl3, 400 MHz): delta 3.68 (s, 3H), 7.15 (d, J = 9.0 Hz, 1H), 7.18 (d, J = 5.1 Hz, 1H), 7.40 – 7.42 (m, 3H), 7.46 (dd, J = 4.4, 8.3 Hz, 1H), 7.58 (s, 1H), 8.03 (dd, J = 2.0, 8.3 Hz, 1H), 8.32 (d, J = 9.3 Hz, 1H), 8.38 – 8.41 (m, 2H), 8.69 (d, J = 5.1 Hz, 1H), 9.10 (dd, J = 2.0, 4.1 Hz, 1H) Mass spectrometric value (ESI-MS, m/z): 403 (M+Na)+, 249889-68-7

With the rapid development of chemical substances, we look forward to future research findings about 8-Chloro-2-methoxy-1,5-naphthyridine

Reference£º
Patent; KIRIN BEER KABUSHIKI KAISHA; EP1724268; (2006); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

As a common heterocyclic compound, it belong naphthyridine compound,7-Chloro-1,8-naphthyridin-2-ol,15944-34-0,Molecular formula: C8H5ClN2O,mainly used in chemical industry, its synthesis route is as follows.,15944-34-0

A mixture of 7-chloro-l,8-naphthyridin-2(lH)-one (52-1) (1.26 g, 7 mmol) and cesium carbonate (4.56 g, 14 mmol) was stirred at 115 C overnight. The mixture was diluted with methanol (6 mL) and purified by reverse phase column chromatography (acetonitrile : water = 17:83, with 0.01% NH4OH) to afford compound 52-2 (1.15 g, 70% yield) as a light yellow solid. MS (ESI): m/z 235 [M+H]+.

With the synthetic route has been constantly updated, we look forward to future research findings about 7-Chloro-1,8-naphthyridin-2-ol,belong naphthyridine compound

Reference£º
Patent; SUNOVION PHARMACEUTICALS INC.; JONES, Phillip, G.; LEW, Robert; SPEAR, Kerry, L.; XIE, Linghong; WO2013/169964; (2013); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem