Month: November 2020

It is a common heterocyclic compound, the naphthyridine compound, 2-Methyl[1,8]-Naphthyridine, cas is 1569-16-0 its synthesis route is as follows.

2-Methyl-1,8-naphthyridine (1.1592 g, 8.0 mmol) and SeO2 (1.2452 g, 11.2 mmol) were added to 20 mL of 1,4-dioxane. The mixture were refluxed for 4 h in nitrogen atmosphere and filtered. The filtrate was concentrated in vacuum to give the crude product and the final product was obtained by column chromatography (200-300 mesh, ethyl acetate) (0.71 g, 56.6percent yield). Characterization of 1,8-naphthyridine-2-aldehyde: HRMS (EI) m/z: calcd for C9H7N2O [M+H]+, 159.0588; found, 159.0561. 1H NMR: (400 MHz; DMSO; TMS) 10.15 (s, 1H), 9.24-9.26 (m, 1H), 8.71 (d, 1H), 8.60-8.62 (m, 1H), 8.08 (d, 1H), 7.78-7.80 (m, 1H). 13C NMR (100 MHz, DMSO): 194.3, 155.8, 155.5, 155.0, 140.5, 138.3, 125.6, 124.9, 118.5.

1569-16-0, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,1569-16-0 ,2-Methyl[1,8]-Naphthyridine, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Liu, Xingjiang; Chen, Mingxing; Liu, Ziping; Yu, Mingming; Wei, Liuhe; Li, Zhanxian; Tetrahedron; vol. 70; 3; (2014); p. 658 – 663;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

952059-69-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 8-Chloro-3-methoxy-1,5-naphthyridine, cas is 952059-69-7,the naphthyridine compound, it is a common compound, a new synthetic route is introduced below.

2-(2-(7-Methoxyquinolin-4-ylamino)ethyl)-6-phenylpyridazin-3(2H)- one. A mixture of 2-(2-aminoethyl)-6-phenylpyridazin-3(2H)-one (60 mg, 743 mumol) and 8-chloro-3-methoxy-l,5-naphthyridine (55 mg, 282 mumol) in iPrOH (2 mL) was heated to 150 0C for 15 min under microwave. The mixture was filtered and the filtrate was chromatographed on silica with 2-5% (2N NH3-MeOH) in CH2Cl2 to give the product as a white solid (60 mg). MS (ESI pos. ion) calc’d for C2IHi9N5O2: 373.1; found 374.2 (MH+). 1H NMR (400 MHz, Chloroform-d) delta ppm 3.81 – 3.89 (m, 2 H) 3.92 (d, J=I.37 Hz, 3 H) 4.64 (t, J=5.48 Hz, 2 H) 6.54 (dd, 1 H) 7.03 (dd, J=9.78, 1.57 Hz, 1 H) 7.10 (s, 1 H) 7.39 – 7.48 (m, 4 H) 7.66 (dd, J=9.59, 1.56 Hz, 1 H) 7.70 – 7.79 (m, 2 H) 8.38 (t, 1 H) 8.46 (dd, 1 H).

The chemical industry reduces the impact on the environment during synthesis,952059-69-7,8-Chloro-3-methoxy-1,5-naphthyridine,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; AMGEN INC.; WO2008/103277; (2008); A2;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

254-60-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1,8-Diazanaphthalene, cas is 254-60-4,the naphthyridine compound, it is a common compound, a new synthetic route is introduced below.

Step C 2-Chloro-3-cyclopropyl-[1,8]naphthyridine (2-5) A mixture of naphthyridine 2-4 (14 g, 77 mmol) and 100 mL POCl3 and 0.1 mL DMF was refluxed at 120 C. for 3 hr and concentrated. The residue was treated with 300 mL ice-water and solid K2CO3 until pH=9. The mixture was extracted three times with ethyl acetate, washed with brine and dried over MgSO4. After solvent removal, the desired compound 2-5 was obtained as a yellowish solid. 1H NMR (400 MHz, CDCl3): delta9.00 (q, 1H), 8.10 (q, 1H), 7.78 (s, 1H), 7.50 (q, 1H), 2.34 (m, 1H), 1.00 (m, 2H), 0.82 (m, 2H).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 1,8-Diazanaphthalene, 254-60-4

Reference£º
Patent; Wang, Jiabing; US2004/38963; (2004); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

1260670-05-0, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3-Bromo-8-chloro-1,7-naphthyridine, cas is 1260670-05-0,the naphthyridine compound, it is a common compound, a new synthetic route is introduced below.

Step 1 To a 100 mL sealed tube was added 3~bromo-8-chloro-l,7-naphthyridine K-l (1.00 g, 4.10 mmol), 1,4-dioxane (15 mL) and NH3_H20 (40 mL) at room temperature. The mixture was sealed and stirred at 100 C for 15 h, then cooled and partitioned between water (150 mL) and EtOAc (100 mL). The aqueous layer was extracted with EtOAc (50 mL x 2) and the combined extracts were dried over sodium sulfate, filtered and concentrated in vacuo to afford compound K-2. MS for K-2: m/e = 224 and 226 (M+l).

The chemical industry reduces the impact on the environment during synthesis,1260670-05-0,3-Bromo-8-chloro-1,7-naphthyridine,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; MERCK SHARP & DOHME CORP.; WALSH, Shawn, P.; CUMMING, Jared, N.; HE, Shuwen; TAOKA, Brandon, M.; TRUONG, Quang, T.; WU, Wen-Lian; (122 pag.)WO2015/187437; (2015); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

Name is 7-Bromo-2-chloro-1,5-naphthyridine, as a common heterocyclic compound, it belongs to naphthyridine compound, and cas is 1309774-03-5, its synthesis route is as follows.

Example 0929 N,N-dimethylacetamide (75 mL), 5-isopropylpyridazine-3-amine (5.12 g) and sodium tert-amyl oxide (9.08 g) were added to 7-bromo-2-chloro-1,5-naphthyridine (9.58 g), followed by stirring at 80 C. for 1 hour. The reaction mixture was poured into water (300 mL), and the precipitated solid was collected by filtration and washed with ethanol, thereby obtaining 7-bromo-N-(5-isopropylpyridazin-3-yl)-1,5-naphthyridine-2-amine (7.70 g) as a brown solid. 1H-NMR (DMSO-d6) delta: 10.89 (1H, s), 8.88 (1H, d, J=2.0 Hz), 8.80 (1H, d, J=2.0 Hz), 8.73 (1H, d, J=2.0 Hz), 8.48 (1H, d, J=2.0 Hz), 8.27 (1H, d, J=9.2 Hz), 7.79 (1H, d, J=9.2 Hz), 3.09-3.00 (1H, m), 1.32 (6H, d, J=6.6 Hz). MS m/z (M+H): 344.

1309774-03-5, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,1309774-03-5 ,7-Bromo-2-chloro-1,5-naphthyridine, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; FUJIFILM Corporation; FURUYAMA, Hidetomo; KURIHARA, Hideki; TERAO, Takahiro; NAKAGAWA, Daisuke; TANABE, Shintaro; KATO, Takayuki; YAMAMOTO, Masahiko; SEKINE, Shinichiro; MASHIKO, Tomoyuki; INUKI, Shinsuke; UEDA, Satoshi; US2015/322063; (2015); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

959558-28-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 4-Bromo-2,7-naphthyridin-1-amine, cas is 959558-28-2,the naphthyridine compound, it is a common compound, a new synthetic route is introduced below.

A solution of Bromo compound 6a (96 mg, 0.43 mmol, 1.2 equiv), Pd(PPh3)4 (10 mol%), CuI (5 mol%) and Triphenylphosphine (10 mg) in Triethylamine (1.5 mL, 10.8 mmol, 30 equiv) was de-oxygenated using steam of Argon gas. A de-oxygenated solution of alkyne 3b (150 mg, 0.36 mmol, 1 equiv) in DMF (4 mL) was added slowly over a period of 10 min to the solution and the reaction temperature was increased to 50 C and allowed to stir 12 h. The reaction was quenched by addition of NH4Cl (5 mL) at room temperature and diluted with ethyl acetate (300 mL). The organic layer was washed with water (5 ¡Á 50 mL) and washed with brine (1 ¡Á 50 mL). Combined organic layers were dried over anhydrous sodium sulphate, filtered and concentrated in vacuo. The pure product 15 was obtained by flash column chromatography. Yield = 49%.; TLC Rf = 0.1 (10 % MeOH/CH2Cl2). 1H NMR (500 MHz, DMSO-d6) delta 10.65 (s, 1H), 9.60 (s, 1H), 8.93 (s, 1H), 8.74 (d, J = 5.7 Hz, 1H), 8.48 (s, 1H), 8.39 (s, 1H), 8.18 (s, 1H), 8.03 (d, J = 8.5 Hz, 1H), 7.92 (s, 2H), 7.88 (d, J = 5.7 Hz, 1H), 7.70 (d, J = 8.5 Hz, 1H), 3.55 (s, 2H), 2.80 (s, 3H), 2.37 (s, 8H), 2.14 (s, 3H); 13C NMR (126 MHz, DMSO) delta 164.01, 162.28, 158.58, 152.20, 149.63, 148.92, 147.44, 140.37, 138.34, 137.81, 132.86, 131.74, 127.93, 127.77, 123.97, 118.86, 117.71, 117.37, 112.05, 101.07, 92.66, 90.47, 57.90, 55.19, 53.17, 46.19, 24.28; HRMS (ESI+): calcd. for C30H29F3N7O (MH+) 560.2380, found 560.2380

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 959558-28-2, 4-Bromo-2,7-naphthyridin-1-amine

Reference£º
Article; Wang, Modi; Naganna; Sintim, Herman O.; Bioorganic Chemistry; vol. 90; (2019);,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

15944-34-0, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 7-Chloro-1,8-naphthyridin-2-ol, cas is 15944-34-0,the naphthyridine compound, it is a common compound, a new synthetic route is introduced below.

A suspension of 300 mg (1.66 mmole) OF7-CHLORO-LH- [1, 8] naphthyridin-2-one (J. ORG. Chem. 1990, 55, 4744-4750) in 5 ML of anhydrous DMF was cooled to 0 C in an ice bath under a N2 atmosphere. A solution of 1.0 M lithium bis (trimethylsilyl) amide in THF (2.0 mL, 2.0 mmole) was added in a dropwise fashion. After stirring at 0 C for 5 min. , 381 mg (2.49 mmole) of 1-bromo-3-methoxypropane was added. The ice bath was removed, and the reaction mixture was stirred at room temperature for 5 min. An additional 5 ML of anhydrous DMF was added, and the heterogeneous mixture was stirred at room temperature for 18 hr. The reaction mixture was diluted with EtOAc, and washed with H20 (3x) and brine. The organic layer was dried over MGS04, filtered, and concentrated. Purification by flash column chromatography (SIO2, 40% EtOAc/hexanes gradient to 60% EtOAc/hexanes) gave 304 mg (72 %) of 7-chloro- 1-(3-methoxypropyl)-1H-[1,8]naphthyridin-2-one. MS : NEZ 253. 1,255. 1 (M+I)

The chemical industry reduces the impact on the environment during synthesis,15944-34-0,7-Chloro-1,8-naphthyridin-2-ol,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; WARNER-LAMBERT COMPANY LLC; WO2004/89915; (2004); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

952059-69-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 8-Chloro-3-methoxy-1,5-naphthyridine, cas is 952059-69-7,the naphthyridine compound, it is a common compound, a new synthetic route is introduced below.

To a microwave vial (10-20 mL) was added (6- (3-methylisoxazol-5-yl) – [1, 2, 4] triazolo [4, 3-b] pyridazin-3 -yl) methanamine (1.00 g, 4.34 mmol) and 8-chloro-3-methoxy-l, 5-naphthyridine (1.10 g, 5.65 mmol) in 2-butanol (12 mL) . The suspension was stirred at 1200C under microwave irradiation for four hours . The mixture was concentrated and taken up in ammonia in methanol (2.0 M) then purified by MPLC chromatography (eluted with 0-10% methanol in dichloromethane) to yield the product as a tan solid. MS m/z = 389.0 [M+l] + . CaIc ‘d for Ci9Hi6N8O2: 388.1

The chemical industry reduces the impact on the environment during synthesis,952059-69-7,8-Chloro-3-methoxy-1,5-naphthyridine,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; AMGEN INC.; WO2008/8539; (2008); A2;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

Name is Ethyl 7-chloro-1-(2,4-difluorophenyl)-6-fluoro-4-oxo-1,4-dihydro-1,8-naphthyridine-3-carboxylate, as a common heterocyclic compound, it belongs to naphthyridine compound, and cas is 100491-29-0, its synthesis route is as follows.

General procedure: Ethyl 7-chloro-1-(2,4-difluorophenyl)-6-fluoro-4-oxo-1,4-dihydro-1,8-naphthyridine-3-carboxylate (1) / carboxylic acid (2) (0.001 mol) and appropriate substituted benzazol-2-thiol derivative (0.001 mol) or N,N- dimethyl-(3-piperazin-1-yl)propan-1-amine (0.001 mol) and K2CO3 were dissolved in acetone (30 mL). The solution was refluxed at 40 C for 12 h. Reaction mixture was cooled down and adjusted to pH=7 by AcOH. Acetone was evaporated, the residue was washed with water, filtered, dried and recrystallized from EtOH.

100491-29-0, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,100491-29-0 ,Ethyl 7-chloro-1-(2,4-difluorophenyl)-6-fluoro-4-oxo-1,4-dihydro-1,8-naphthyridine-3-carboxylate, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Gencer, Huelya Karaca; Levent, Serkan; Acar Cevik, Ulviye; Oezkay, Yusuf; Ilg?n, Sinem; Bioorganic and Medicinal Chemistry Letters; vol. 27; 5; (2017); p. 1162 – 1168;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

Name is 7-Chloro-1,8-naphthyridin-2-ol, as a common heterocyclic compound, it belongs to naphthyridine compound, and cas is 15944-34-0, its synthesis route is as follows.

A mixture of 7-chloro-1 ,2-dihydro-1 ,8-naphthyridin-2-one (1 g, 5.53 mmol), 3-bromo-1 , 1- dimethoxypropane (1.1 g, 6.09 mmol) and K2CO3 (1.1 g, 8.31 mmol) in DMF (20 mL) was heated at 70C for 4 h. The mixture was then allowed to cool to room temperature, poured into H2O (30 mL) and extracted with EtOAc (30 mL x 3). The combined organic extracts were washed with H2O (50 mL x 2), brine (50 mL), dried over Na2S04, filtered and concentrated under reduced pressure. The residue was purified by silica gel chromatography using 30% EtOAc/petroleum ether to give a yellow solid of 7-chloro-1-(3,3- dimethoxypropyl)-1 ,2-dihydro-1 ,8-naphthyridin-2-one 6a (1 g, 64%). TLC : Rf = 0.54 (silica gel, EtOAc/petroleum ether = 1 : 1 , v/v).

15944-34-0, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,15944-34-0 ,7-Chloro-1,8-naphthyridin-2-ol, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; REDX PHARMA PLC; COOPER, Ian; LYONS, Amanda; (102 pag.)WO2017/137743; (2017); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem