Sall, Mohamed Lamine published the artcileRemoval of Cr(VI) from aqueous solution using electrosynthesized 4-amino-3-hydroxynaphthalene-1-sulfonic acid doped polypyrrole as adsorbent, SDS of cas: 116-63-2, the publication is Environmental Science and Pollution Research (2017), 24(26), 21111-21127, database is CAplus and MEDLINE.
Polypyrrole (PPy) conducting films, doped with 4-amino-3-hydroxynaphthalene sulfonic acid (AHNSA), were electrosynthesized by anodic oxidation of pyrrole on Pt and steel electrodes in aqueous medium (0.01 M AHNSA +0.007 M NaOH), using cyclic voltammetry (CV), and their electrochem. properties were studied. Fourier-transform IR (FT-IR) spectroscopy confirmed the formation of AHNSA-PPy films. Their morphol. was characterized by SEM (SEM), and their optical properties, including UV-VIS absorption and fluorescence spectra, were also investigated. AHNSA-PPy films were used for the removal of chromium(VI) from aqueous solution, by means of the immersion method and the Cr(VI) electro-reduction method. The effect of various exptl. parameters, including the adsorbent (polymer) mass, pH, type of electrodes, and current intensity, on the adsorption of chromium by the polymer was performed and optimized. The adsorption and electro-reduction of (Cr VI) on the AHNSA-PPy film surface were found to be highly pH-dependent, and the kinetics of Cr(VI) adsorption and electro-reduction followed second-order kinetic curves. Apparent second-order rate constants were about three times higher for the Cr(VI) electro-reduction method than for the immersion method, indicating that the use of electro-reduction method significantly accelerated the chromium adsorption process on polymer. The maximum adsorption capacity of the AHNSA-PPy film for chromium was 224 mg g-1. A 96% chromium removal from pure aqueous solution was reached within about 48 h by the immersion method, but only within about 6 h by the Cr(VI) electro-reduction method. Application of both methods to Cr(VI) fortified natural waters of Senegal led to chromium removal efficiency high values (93 to 96% according to the type of natural water).
Environmental Science and Pollution Research published new progress about 116-63-2. 116-63-2 belongs to naphthyridine, auxiliary class Sulfonic acid,Amine,Naphthalene,Alcohol,Organic Pigment, name is 4-Amino-3-hydroxynaphthalene-1-sulfonic acid, and the molecular formula is C10H9NO4S, SDS of cas: 116-63-2.
Referemce:
https://en.wikipedia.org/wiki/1,8-Naphthyridine,
1,8-Naphthyridine | C8H6N2 – PubChem