Heterocyclic Building Blocks-Naphthyridine

17965-71-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3-Bromo-1,5-naphthyridine, cas is 17965-71-8,the naphthyridine compound, it is a common compound, a new synthetic route is introduced below.

Preparation of 1 ,5-naphthyridin-3-amine:[0589] Commercial 3-bromo-[l,5]naphthyridine (1.00 g, 4.8 mmol) was dissolved in 50 mL dioxane. To it were added t-butyl carbamate (0.85 g, 7.2 mmol), cesium carbonate (3.13 g, 9.6 mmol), Pd2(dba)3 (0.22 g, 0.24 mmol) and XantPhos (0.42g, 0.72 mmol). The mixture was degassed with Ar stream and stirred under Ar in 85C bath for 5 h. The mixture was concentrated, taken into 400 mL EtOAc and 200 mL water. The organic phase was separated, dried, concentrated and subjected to flash column (0-30% EtOAc in DCM) to obtain tert- butyl l,5-naphthyridin-3-ylcarbamate (1.04 g, 88% yield). This compound was treated with 50 mL 4N HCl in dioxane for overnight. To the suspension was poured diethyl ether 300 mL. The suspension was vigorously stirred. The solid product was collected by filtration as 1,5- naphthyridin-3 -amine di-HCl salt

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 3-Bromo-1,5-naphthyridine, 17965-71-8

Reference£º
Patent; PORTOLA PHARMACEUTICALS, INC.; JIA, Zhaozhong, J.; SONG, Yonghong; XU, Qing; KANE, Brian; BAUER, Shawn, M.; PANDEY, Anjali; WO2012/61418; (2012); A2;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

As a common heterocyclic compound, it belongs to naphthyridine compound, name is 2-Methyl[1,8]-Naphthyridine, and cas is 1569-16-0, its synthesis route is as follows.

STEP 2. SYNTHESIS OF (E)-1-ETHOXY-2- (1, 8-NAPHTHYRIDIN-2- YL) ethanol. To the product from step 1, (81.5 G, 0.57 mol) in anhydrous THF (1.9 L) at – 40 C under Ar gas was added lithium bis (trimethylsilyl) amide (1 M in THF, 1.2 L, 1.2 MOL). After stirring for 30 min at-40 C, DIETHYLCARBONATE (72.5 mL, 0.60 mol) was added. The temperature of the reaction mixture was warmed up to 0 C and stirred for 2 h. The reaction mixture was quenched into saturated aq. NH4CI (700 mL) and the THF removed under reduced pressure. The resulting mixture was extracted with EtOAc (3 x 700 mL). The organic layers were combined, washed with brine, dried over NA2SO4, and concentrated under reduced pressure. The resulting residue was purified by flash column chromatography using 50percent EtOAc/hexane to give a yellow solid (81.2 g, 0.38 mol, 66percent).APOS;H NMR (400 MHz, DMSO-d6) 8 1.22 (t, 3H), 4.11 (q, 2H), 4.89 (s, 1H), 6.78 (d, 1H), 7.15 (dd, 1H), 7.47 (d, 1H), 7.80 (d, 1H), 8.36 (d, 1H), 11.8 (bs, 1H). LC-MS (MH+) = 217.

1569-16-0, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,1569-16-0 ,2-Methyl[1,8]-Naphthyridine, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; PHARMACIA CORPORATION; WO2004/58761; (2004); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

As a common heterocyclic compound, it belongs to naphthyridine compound, name is 2-Methyl[1,8]-Naphthyridine, and cas is 1569-16-0, its synthesis route is as follows.

A stirred solution of 2-methyl-1,8-naphthyridine (57.5 g, 399 mmol) (available from Manchester Organics) and (R)-tert-butyl 3-(iodomethyl)pyrrolidine-1-carboxylate (124.2 g, 399mmcl) (Intermediate 1) in THF (1 L) was cooled to 0 ¡ãC and treated under nitrogen with a solution of lithium bis(trimethylsilyl)amide in THE (1M, 399 mL, 399 mmcl) over 20 mm and the reaction mixture was stirred at 0 ¡ãC for 3 h. The reaction was quenched with saturated ammonium chloride solution (500 mL) and water (500 mL) and ethyl acetate (1 L) was added. The layers were separated and the aqueous phase was extracted with further ethyl acetate (1 L). The combinedorganic layers were dried (MgSO4), filtered and evaporated in vacuo. The residual brown oil (162 g) was purified by chromatography on a silica cartridge (750 g) eluting with a gradient of 0 ? 100percent [ethyl acetate in (5percent MeOH ? 95percent ethyl acetate)] over 8 column volumes. The appropriate fractions were combined and evaporated in vacuo to give the title compound (46.65 g, 36percent) as an orange solid: LCMS (System A) RT=0.99 mm, 97percent, ES+ve m/z328 (M+H)?, [aiD2¡ã = + 22 (c 1.00in EtOH).

1569-16-0, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,1569-16-0 ,2-Methyl[1,8]-Naphthyridine, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; GLAXOSMITHKLINE INTELLECTUAL PROPERTY DEVELOPMENT LIMITED; ANDERSON, Niall Andrew; CAMPBELL, Ian Baxter; CAMPBELL-CRAWFORD, Matthew Howard James; HANCOCK, Ashley Paul; LEMMA, Seble; MACDONALD, Simon John Fawcett; PRITCHARD, John Martin; PROCOPIOU, Panayiotis Alexandrou; (64 pag.)WO2016/46230; (2016); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

As a common heterocyclic compound, it belongs to naphthyridine compound, name is Ethyl 7-chloro-1-(2,4-difluorophenyl)-6-fluoro-4-oxo-1,4-dihydro-1,8-naphthyridine-3-carboxylate, and cas is 100491-29-0, its synthesis route is as follows.

A. 1.1 g (12.8 mmol) of pivalaldehyde are added to 0.86 g (10 mmol) of 3-amino-pyrrolidine at room temperature and after 1 hour the mixture is diluted with 20 ml of acetonitrile and 10 ml of dimethylformaldehyde. 1.1 g (10 mmol) of 1,4-diazabicyclo-[2.2.2]octane and 3.8 g (10 mmol) of ethyl 7-chloro-1-(2,4-difluorophenyl)-6-fluoro-1,4-dihydro-4-oxo-1,8-naphthyridine-3-carboxylate are added and the mixture is stirred overnight at room temperature. The precipitate is filtered off with suction, washed with water and dried in vacuo at 100 C. Yield: 4.25 g (85% of theory) of ethyl 1-(2,4-difluorophenyl)-7-[3-(2,2-dimethyl-propylidene-amino)-1-pyrrolidinyl]-6-fluoro-1,4-dihydro-4-oxo-1,8-naphthyridine-3-carboxylate of melting point: 197-198 C. (with decomposition). 1 H-NMR (CDCl3): delta 1.05 s (9H), 1.4 t (3H), 1.9 m und2.05 m (2H), a broad m at 3.5-3.7 (6H), 4.4 q (2H), 7.05 m (2H), 7.4 m (1H), 8.05 d (1H), 8.35 ppm s (1H).

100491-29-0, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,100491-29-0 ,Ethyl 7-chloro-1-(2,4-difluorophenyl)-6-fluoro-4-oxo-1,4-dihydro-1,8-naphthyridine-3-carboxylate, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; Bayer Aktiengesellschaft; US5061712; (1991); A;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

1569-16-0, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 2-Methyl[1,8]-Naphthyridine, cas is 1569-16-0,the naphthyridine compound, it is a common compound, a new synthetic route is introduced below.

The mixture of 2-methyl-l,8-naphthyridine (85 mg, 0.586 mmol), E25A (128 mg, 0.586 mmol), and 4-methylbenzenesulfonamide (100 mg, 0.586 mmol) in DME (10 mL) was heated at 170 ¡ãC under microwave conditions for 2 h. The mixture was purified by reverse phase ISCO (26 g C18 30 min gradient from 100percent A: 0percent B to 0percent A: 100percent B (A = 90percent H2O/10 percent ACN + 0.1percent TFA); (B = 90percent ACN/10percent H2O + 0.1percent TFA); detection at 220 nm) to yield E25B (18 mg, 5percent) as a minor byproduct. LCMS (ES): m/z 516.2 [M+H]+.

The chemical industry reduces the impact on the environment during synthesis,1569-16-0,2-Methyl[1,8]-Naphthyridine,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; BRISTOL-MYERS SQUIBB COMPANY; DEVASTHALE, Pratik; MOORE, Fang; ZHAO, Guohua; PIENIAZEK, Susan Nicole; SELVAKUMAR, Kumaravel; DHANUSU, Suresh; PANDA, Manoranjan; MARCIN, Lawrence R.; (384 pag.)WO2018/89355; (2018); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

1569-16-0, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 2-Methyl[1,8]-Naphthyridine, cas is 1569-16-0,the naphthyridine compound, it is a common compound, a new synthetic route is introduced below.

In a 25 mL microwave reaction tube,Adding 2-methylnaphthyridine,Salicylaldehyde 0.5 g (4 mmol) and 10 ml acetic anhydride,Forming an orange-red solution,At a controlled temperature of 130 ¡ã C,Microwave power 50W, microwave reaction 40min,With the thin layer of the reaction process to monitor;After the reaction,The solvent was concentrated under reduced pressure to remove acetic anhydride,Oil-like viscous liquid,Dissolved with hot ethanol,Then recrystallized from acetone,Precipitation of yellow powder,That is, 2- (2′-hydroxystyryl) naphthyridine probe reagent,Yield 35percent.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 2-Methyl[1,8]-Naphthyridine, 1569-16-0

Reference£º
Patent; Guizhou University; Ceng, Xi; Ruan, Qin; Mou, Lan; Li, Zhao; Zhang, Hong; (29 pag.)CN106045996; (2016); A;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

1260670-05-0, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3-Bromo-8-chloro-1,7-naphthyridine, cas is 1260670-05-0,the naphthyridine compound, it is a common compound, a new synthetic route is introduced below.

Method N B-9 Ex. 3 To a stirred solution of Intermediate B-9 (400 mg, 0.937 mmol) and 3-bromo-8-chloro-l,7- naphthyridine (252 mg, 1.03 mmol) in THF (10 mL) was added LHMDS (1 M in THF, 3.28 mL, 3.28 mmol) at RT. The mixture was stirred at 45 C overnight, quenched with NH CI (sat.) and extracted with DCM. The combined organic extracts were dried over Na2S04 and concentrated. The residue was treated with 5 mL of DCM and 0.5 mL of TFA and stirred at 25 C for 2 h. The mixture was neutralized with NaHC03 and extracted with DCM. The organic layer was washed with brine, dried over Na2S04 and concentrated. The residue was purified by silica column chromatography (PE: EtOAc = 1 : 1) to afford example 3. MS for example 3: m/e = 533 and 535 (M+l).

The chemical industry reduces the impact on the environment during synthesis,1260670-05-0,3-Bromo-8-chloro-1,7-naphthyridine,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; MERCK SHARP & DOHME CORP.; WALSH, Shawn, P.; CUMMING, Jared, N.; HE, Shuwen; TAOKA, Brandon, M.; TRUONG, Quang, T.; WU, Wen-Lian; (122 pag.)WO2015/187437; (2015); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

Name is Ethyl 7-chloro-1-(2,4-difluorophenyl)-6-fluoro-4-oxo-1,4-dihydro-1,8-naphthyridine-3-carboxylate, as a common heterocyclic compound, it belongs to naphthyridine compound, and cas is 100491-29-0, its synthesis route is as follows.

A. 7-([1alpha,2alpha,5alpha]-1-tert-Butoxycarbonylamino-2-methyl-3-azabicyclo[3.1.0]hex-3-yl)-6-fluoro-1-(2,4-difluoro phenyl)-1,4-dihydro-4-oxo-1,8-naphthyridine-3-carboxylic acid, ethyl ester [1alpha,2alpha,5alpha]-1-tert-Butoxycarbonylamino-2-methyl-3-azabicyclo[3.1.0]hexane and 7-chloro-6-fluoro-1-(2,4-difluorophenyl)-1,4-dihydro-4-oxo-1,8-naphthyridine-3-carboxylic acid ethyl ester were reacted and purified according to the procedure of Example 23.A to provide the title product as a solid, mp 181-183 C. (72% yield). 1 H NMR (MeOH-d4): 8.57 (s, 1H), 7.96 (bd, J=12.4 Hz, 1H), 7.63 (m, 1H), 7.26 (m, 2H), 4.3 (vbm, 1H), 4.28 (q, J=7.0 Hz, 2H), 3.8 (vbm, 2H), 1.72 (m, 1H), 1.42 (s, 9H), 1.31 (t, J=7.0 Hz, 3H), 0.98 (m, 4H), 0.65 (m, 1H).

100491-29-0, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,100491-29-0 ,Ethyl 7-chloro-1-(2,4-difluorophenyl)-6-fluoro-4-oxo-1,4-dihydro-1,8-naphthyridine-3-carboxylate, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; Pfizer Inc; US5164402; (1992); A;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

254-60-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1,8-Diazanaphthalene, cas is 254-60-4,the naphthyridine compound, it is a common compound, a new synthetic route is introduced below.

Synthesis of 2-[1-(2-tert-butyl-6-chloro-5-methyl-pyrimidin-4-yl)-piperidin-4-yl]-[1,8]naphthyridine 20 ml of dimethylacetamide and 5 ml (17.8 mmoles) of diisopropylethylamine are added into a single-necked flask containing 1.5 g (6.84 mmoles) of 2-tert-butyl-4,6-dichloro-5-methyl-pyrimidine and 1.46 g (6.84 mmoles) of 2-piperidin-4-yl-[1,8]naphthyridine. This mixture is heated at 100 C. overnight. The next day 0.2 equivalent of naphthyridine is added and the mixture is heated for another 6 hours. The reaction mixture is returned to ambient temperature before concentrating to dryness. The residue obtained is taken up in a mixture of water, ethyl acetate and a saturated solution of sodium bicarbonate. The organic phase is separated and the aqueous phase reextracted with ethyl acetate. The collected organic phases are dried over magnesium sulphate then the solvent is evaporated off under reduced pressure (2 kPa). The residue is chromatographed on silica gel eluding with a gradient of heptane-ethyl acetate (70-30) to heptane-ethyl acetate (50-50). 1.77 g of expected product is obtained. TLC: Rf=0.50 [silica gel, eluent heptane-ethyl acetate (50-50). 1H-NMR (CDCl3): delta 1.37 (s, 9H, tert-butyl); 2.1 (m, 1H, cyclopropyl); 2.15 (m, 4H, N-CH2–CH–CH2); 2.27 (s, 3H, CH3); 3.1 and 4.05 (2m, 4H, CH2–N–CH2); 3.25 (m, 1H, N-CH2-CH2–CH2-CH2); [(7.48; 8.18; 9.12), 3m, 5H, naphthyridine]. MS: 396 (MH+).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 1,8-Diazanaphthalene, 254-60-4

Reference£º
Patent; Proskelia SAS; US2008/58348; (2008); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

As a common heterocyclic compound, it belongs to naphthyridine compound, name is 1,8-Naphthyridin-2-amine, and cas is 15992-83-3, its synthesis route is as follows.

The synthetic route for diarylethene 1O is shown in Scheme 2 . The intermediate compounds 2 and 3 were synthesized according to the similar procedures as previous descriptions [57,58]. A mixture of compound 3 (0.56g, 1.0mmol), 4 (0.15g, 1.0mmol), EDCI (0.23g, 1.2mmol), HOBT (0.16g, 1.2mmol) and triethylamine (0.41mL, 3.0mmol) in anhydrous CH2Cl2 (50mL) was stirred at room temperature for 10h under a nitrogen atmosphere. The reaction mixture was washed with water, dried over anhydrous Na2SO4, and evaporated. The crude product was purified by column chromatography using petroleum ether/ ethyl acetate (v/v=1:1) as eluent to obtain 0.15g of the target compound 1O as white solid in 24% yield. M.p. 504-505K; 1H NMR (400MHz, THF, ppm): delta 1.82 (s, 3H), 1.89 (s, 3H), 2.32 (s, 3H), 6.71 (s, 1H), 7.27-7.30 (m, 1H), 7.46 (s, 1H), 7.67 (d, 2H, J=8.0Hz), 8.07 (d, 2H, J=8.0Hz), 8.12 (d, 1H, J=8.0Hz), 8.20 (d, 1H, J=8.0Hz), 8.52 (d, 1H, J=8.0Hz), 8.84 (s, 1H), 10.45 (s, 1H); 13C NMR (100MHz, THF, ppm): delta 11.50, 11.62, 12.01, 113.63, 118.49, 118.70, 122.10, 122.44, 122.73, 123.19, 124.37, 126.98, 131.74, 134.40, 134.77, 136.38, 136.93, 138.13, 139.25, 140.62, 151.42, 152.96, 153.39, 163.66; IR (KBr, nu, cm-1):712, 735, 759, 783, 809, 825, 843, 890, 937, 988, 1050, 1102, 1138, 1187, 1264, 1275, 1336, 1424, 1493, 1608, 1674, 2860, 2928, 3217, 3517; Anal. Calcd for C31H21F6N3OS2: C, 59.13; H, 3.36; N, 6.67; found: C, 59.04; H, 3.41; N, 6.59; HRMS-ESI (m/z): [M+Na+]+ calcd. 652.0928, found: 652.0901.

15992-83-3, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,15992-83-3 ,1,8-Naphthyridin-2-amine, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Zhang, Xiaoxia; Wang, Renjie; Fan, Congbin; Liu, Gang; Pu, Shouzhi; Dyes and Pigments; vol. 139; (2017); p. 208 – 217;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem