Heterocyclic Building Blocks-Naphthyridine

Name is 7-Bromo-2-chloro-1,5-naphthyridine, as a common heterocyclic compound, it belongs to naphthyridine compound, and cas is 1309774-03-5, its synthesis route is as follows.,1309774-03-5

Example 3.1 : 7-Bromo-[1 ,5]naphthyridin-2-ylamineIn a sealed reactor, 500 mg (1 .23 mmol, 1 eq) of 7-bromo-2-chloro-1 ,5-naphthyridine and 7 mL (41.6 mmol, 33 eq) of 20% aqueous ammonia solution were introduced in 7 mL of dioxane. The mixture was stirred at 160 C for 24 h. The mixture was allowed to reach rt and water was added. Aqueous layer was extracted with ethyl acetate. Organic layers were dried over Na2S04, filtered and evaporated to dryness. The residue was purified by column chromatography using methylene chloride and then methylene chloride /ethanol : 98/2 as eluent. The solvent was evaporated to dryness to afford 220 mg of white powder with 80% yield. Yield: 220 mg (80 % of theory). m.p.: 168-169 C.1H-NMR (DMSO-d6, 400 MHz): delta = 8,57 (d, 1 H); 8,05 (d, 1 H); 7,96 (d, 1 H); 6,04 (d, 1 H); 6,98 (s, 2H) ppm.MS: m/z 225 (M+H+).

With the complex challenges of chemical substances, we look forward to future research findings about 7-Bromo-2-chloro-1,5-naphthyridine

Reference£º
Patent; AeTERNA ZENTARIS GMBH; WO2011/64250; (2011); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

As a common heterocyclic compound, it belongs to naphthyridine compound, name is 2-Methyl[1,8]-Naphthyridine, and cas is 1569-16-0, its synthesis route is as follows.,1569-16-0

A mixture of 2-methyl-1,8-naphthyridine (18.5 g, 128 mmole), 10percent Pd/C (5 g), and absolute EtOH (150 mL) was shaken under hydrogen (15 psi) on a Parr apparatus. After 24 hr, the mixture was filtered through celite.(R)., and the filter pad was washed sequentially with absolute EtOH and EtOAc. The filtrate was concentrated to dryness to leave the title compound (18.85 g, 99percent) as an off-white solid: 1H NMR (300 MHz, CDCl3) delta 7.02 (d, J = 7.5 Hz, 1 H), 6.34 (d, J = 7.5 Hz, 1 H), 4.80 (br s, 1 H), 3.38 (m, 2 H), 2.74 (m, 2 H), 2.30 (s, 3 H), 1.88 (m, 2 H); MS (ES) m/e 149 (M + H)+.

With the complex challenges of chemical substances, we look forward to future research findings about 2-Methyl[1,8]-Naphthyridine

Reference£º
Patent; SmithKline Beecham Corporation; EP1218005; (2004); B1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

It is a common heterocyclic compound, the naphthyridine compound, 2,7-Naphthyridin-1-amine, cas is 27225-00-9 its synthesis route is as follows.,27225-00-9

4-Bromo-2,7-naphthyridin-1-ylamine32 g of 2,7-naphthyridin-1-ylamine is dissolved in 200 ml of acetic acid at room temperature. 35 g of bromine in 200 ml of acetic acid are then added slowly that the temperature does not exceed 25. The mixture is stirred for a further 60 minutes.The suspension obtained is dissolved in 500 ml of water, and the pH is adjusted to pH 7-8 using 500 ml of 25% aqueous ammonia solution.The mixture is stirred for 14 h. The brown precipitate is filtered off, washed with water and dried, giving 28.3 g of crude product. Purification by flash chromatography in ethyl acetate/methanol gives 18.5 g of 4-bromo-2,7-naphthyridin-1-ylamine, M224.06 g/mol, M+H found 224.

With the complex challenges of chemical substances, we look forward to future research findings about 2,7-Naphthyridin-1-amine

Reference£º
Patent; Merck Patent GmbH; Jonczyk, Alfred; Zenke, Frank T.; Amendt, Christiane; US2015/252041; (2015); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

72754-05-3, 6-Bromo-1,8-naphthyridin-2-ol is a naphthyridine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,72754-05-3

Example 7 Synthesis of boronic acid 7Reaction reagents and conditions: a. 1 ) NaH, THF, r.t.; 2) nBuLi, B(OiPr)3, -70C to 0C7.1 Boronic acid 7: To a solution of compound 6 (10 g, 44.44 mmol) in dry tetrahydrofuran (350 mL) was added sodium hydride(2 g, 66.66 mmol, 80% dispersion) at 0C. After the mixture was stirred at room temperature for 30 min, the mixture was cooled below -60C in a dry ice/acetone bath, and n- butyllithium (70 mL, 112 mmol, 1.6 M in hexane) was added over 30 min. The mixture was kept stirring for another 30 min, then triisopropyl borate (40 mL, 177 mmol) was added dropwise. The reaction mixture was stirred for 10 min, and then warmed to 0C slowly in an ice bath. HC1 (5 N) was added to the mixture to adjust pH = 3-4, and the mixture was stirred for 20 min. Aq. NaOH was added to the mixture to adjust pH = 10. After filtration, the organic layer was separated. The aqueous layer was extracted with a mixture of ethyl acetate/THF (4/1; 2 x 120 mL) and EtOAc (100 mL) . The aqueous layer was adjusted to pH = 5-6 with HC1. The precipitate thus formed was collected by filtration and dried to give boronic acid 7 (3.5 g, 41%) a white solid.

72754-05-3 6-Bromo-1,8-naphthyridin-2-ol 12520144, anaphthyridine compound, is more and more widely used in various fields.

Reference£º
Patent; OTSUKA PHARMACEUTICAL CO., LTD.; ABUDUSAIMI, Mamuti; YE, Fangguo; SUN, Jiangqin; MIYAMOTO, Hisashi; CHENG, Jay-Fei; OKA, Daisuke; WO2013/29548; (2013); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

Name is Ethyl 7-chloro-1-(2,4-difluorophenyl)-6-fluoro-4-oxo-1,4-dihydro-1,8-naphthyridine-3-carboxylate, as a common heterocyclic compound, it belongs to naphthyridine compound, and cas is 100491-29-0, its synthesis route is as follows.,100491-29-0

A. 7-([1alpha,2alpha,5alpha]-1-tert-Butoxycarbonylamino-2-methyl-3-azabicyclo[3.1.0]hex-3-yl)-6-fluoro-1-(2,4-difluoro phenyl)-1,4-dihydro-4-oxo-1,8-naphthyridine-3-carboxylic acid, ethyl ester [1alpha,2alpha,5alpha]-1-tert-Butoxycarbonylamino-2-methyl-3-azabicyclo[3.1.0]hexane and 7-chloro-6-fluoro-1-(2,4-difluorophenyl)-1,4-dihydro-4-oxo-1,8-naphthyridine-3-carboxylic acid ethyl ester were reacted and purified according to the procedure of Example 23.A to provide the title product as a solid, mp 181-183 C. (72% yield). 1 H NMR (MeOH-d4): 8.57 (s, 1H), 7.96 (bd, J=12.4 Hz, 1H), 7.63 (m, 1H), 7.26 (m, 2H), 4.3 (vbm, 1H), 4.28 (q, J=7.0 Hz, 2H), 3.8 (vbm, 2H), 1.72 (m, 1H), 1.42 (s, 9H), 1.31 (t, J=7.0 Hz, 3H), 0.98 (m, 4H), 0.65 (m, 1H).

With the complex challenges of chemical substances, we look forward to future research findings about Ethyl 7-chloro-1-(2,4-difluorophenyl)-6-fluoro-4-oxo-1,4-dihydro-1,8-naphthyridine-3-carboxylate

Reference£º
Patent; Pfizer Inc; US5164402; (1992); A;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

As a common heterocyclic compound, it belong naphthyridine compound,7-Chloro-1,8-naphthyridin-2-ol,15944-34-0,Molecular formula: C8H5ClN2O,mainly used in chemical industry, its synthesis route is as follows.,15944-34-0

EXAMPLESEXAMPLE l7-(4-Hydroxy-butoxy)-lH-[l,8]naphthyridin-2-one; To 1 liter (L) of n-methylpyrrolidinone was added 60% sodium hydride suspension (83.6g, 2.09moles). With external cooling to maintain 50C, 1,4-butanediol (3.39 moles) was added dropwise, causing offgassing. The mixture was stirred for 15 minutes at 60C, followed by addition of 7-Chloro-lH-[l,8]naphthyridin-2-one (Journal of Organic Chemistry, 55(15), 4744-50; 1990, 146g, 0.813 moles) while stirring at 680C for 20 hours (h). To the mixture was added 5 liters of acetonitrile followed by filtration of a solid which was washed with a 50:50 mixture of acetonitrile and tetrahydrofuran. The solid was resuspended in 3 liters of tetrahydrofuran, to which was EPO added 3N HCl in methanol (290ml, 0.870 moles). After heating for 1 hour at 6O0C, the mixture was filtered thru celite, washed with 1 liter of tetrahydrofuran and concentrated to 500ml in volume. To the residue was added 1.5 liters of tetrahydrofuran, 1Og Darco activated charcoal, and 100ml Magnesol. After stirring at 40C for 30 minutes (min.), the mixture was filtered and washed with tetrahydrofuran and concentrated to 500ml in volume. To this residue was added 1 liter of acetonitrile followed by concentration of the mixture to 1 liter in volume. The resulting solid precipitate was filtered, washed with acetonitrile and ether, and dried at 50C giving 7-(4-Hydroxy-butoxy)-lH- [l,8]naphthyridin-2-one, 101g, (53% yield).

With the synthetic route has been constantly updated, we look forward to future research findings about 7-Chloro-1,8-naphthyridin-2-ol,belong naphthyridine compound

Reference£º
Patent; WARNER-LAMBERT COMPANY LLC; WO2006/90272; (2006); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

3-Bromo-8-chloro-1,7-naphthyridine, cas is 1260670-05-0, it is a common heterocyclic compound, the naphthyridine compound, its synthesis route is as follows.

A mixture of 3-bromo-8-chloro-1,7-naphthyridine (PharmaBlock catPBLJ2743: 0.200 g, 0.821 mmol), 4,4,5,5-tetramethyl-2-vinyl-1,3,2-dioxaborolane (Aldrich cat663348: 153 muL, 0.904 mmol), sodium carbonate (0.174 g, 1.64 mmol) and [1,1?-bis(dicyclohexylphosphino)ferrocene]dichloropalladium( II) (Aldrich cat701998: 6.2 mg, 0.0082 mmol) in tert-butyl alcohol (5.91 mL, 61.8 mmol) and water (6 mL, 300 mmol) was degassed and sealed. It was stirred at 110 C. for 2 h. The reaction mixture was cooled to room temperature then extracted with ethyl acetate (3¡Á20 mL). The combined organic layers were washed with brine, dried over MgSO4, filtered and concentrated under reduced pressure. The crude residue was used directly in the next step without further purification. LC-MS calculated for C10H8ClN2 (M+H)+: m/z=191.0; found 191.0., 1260670-05-0

1260670-05-0 is used more and more widely, we look forward to future research findings about 3-Bromo-8-chloro-1,7-naphthyridine

Reference£º
Patent; Incyte Corporation; Wu, Liangxing; Qian, Ding-Quan; Lu, Liang; Lajkiewicz, Neil; Konkol, Leah C.; Li, Zhenwu; Zhang, Fenglei; Li, Jingwei; Wang, Haisheng; Xu, Meizhong; Xiao, Kaijiong; Yao, Wenqing; (101 pag.)US2018/177784; (2018); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

Name is 2-Chloro-1,5-naphthyridine, as a common heterocyclic compound, it belongs to naphthyridine compound, and cas is 7689-62-5, its synthesis route is as follows.,7689-62-5

2-chloro- 1 ,5-naphthyridine ( 10- 1 ) (35 g, 213 mmol) in toluene (420 mL) was treated with tributyl(vinyl)stannane (101 g, 93.4 mL, 319 mmol) and tetrakis( phenylphosphine)palladium (36.9 g, 31.9 mmol). The mixture was heated at 140 C under microwave irradiation for 20 min, then cooled and concentrated in vacuo. The residue was purified by silica gel flash column chromatography, eluting with 0-100% EtO Ac/heptane. The fractions containing the desired product (10-2) were pooled, and after solvent removal in vacuo, 19 g (57%) of the product were obtained. LC/MS: m/z (M+H) = 157.2.

With the complex challenges of chemical substances, we look forward to future research findings about 2-Chloro-1,5-naphthyridine

Reference£º
Patent; MERCK SHARP & DOHME CORP.; BARROW, James, C.; COX, Christopher, D.; NOLT, Mark, B.; SHIPE, William, D.; WO2013/74390; (2013); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

As a common heterocyclic compound, it belongs to naphthyridine compound, name is 7-Chloro-1,8-naphthyridin-2-ol, and cas is 15944-34-0, its synthesis route is as follows.,15944-34-0

A suspension of 300 mg (1.66 mmole) OF7-CHLORO-LH- [1, 8] naphthyridin-2-one (J. ORG. Chem. 1990, 55, 4744-4750) in 5 ML of anhydrous DMF was cooled to 0 C in an ice bath under a N2 atmosphere. A solution of 1.0 M lithium bis (trimethylsilyl) amide in THF (2.0 mL, 2.0 mmole) was added in a dropwise fashion. After stirring at 0 C for 5 min. , 381 mg (2.49 mmole) of 1-bromo-3-methoxypropane was added. The ice bath was removed, and the reaction mixture was stirred at room temperature for 5 min. An additional 5 ML of anhydrous DMF was added, and the heterogeneous mixture was stirred at room temperature for 18 hr. The reaction mixture was diluted with EtOAc, and washed with H20 (3x) and brine. The organic layer was dried over MGS04, filtered, and concentrated. Purification by flash column chromatography (SIO2, 40% EtOAc/hexanes gradient to 60% EtOAc/hexanes) gave 304 mg (72 %) of 7-chloro- 1-(3-methoxypropyl)-1H-[1,8]naphthyridin-2-one. MS : NEZ 253. 1,255. 1 (M+I)

With the complex challenges of chemical substances, we look forward to future research findings about 15944-34-0,belong naphthyridine compound

Reference£º
Patent; WARNER-LAMBERT COMPANY LLC; WO2004/89915; (2004); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

As a common heterocyclic compound, it belongs to naphthyridine compound, name is 2-Methyl[1,8]-Naphthyridine, and cas is 1569-16-0, its synthesis route is as follows.,1569-16-0

A solution of 2-Methyl-l ,8-naphthyridine (0.037 g, 0.257 mmol), Intermediate 25 (0.100 g, 0.257 mmol) and 4-methylbenzenesulfonamide (0.044 g, 0.257 mmol) in toluene (0.555 mL) was stirred at 110 C for 14 h. After cooling to room temperature, the solvent was removed in vacuo and the residue was purified by preparative HPLC (Phenomenex Luna AXIA 5u21.2xl00 mm, 10 min gradient, 15 min run, 10% to 100% Solvent B = 90% MeOH-10% H2O-0.1%TFA, Solvent A = 10% MeOH-90% H2O-0.1%TFA) to afford TFA salts of IB and IE, respectively. These salts were individually dissolved in MeOH (1.000 mL) and 250 mg Dianion WA21J resin was added. After stirring at room temperarture for 1 h, the resin was removed by filtration and washed well with MeOH. The filtrates were concentrated in vacuo to afford IB (25.8 mg, 20%) as an orange-brown oil and IE (32.5 mg, 19%) as a brown oil, respectively. IB: NMR (500MHz, CDCb) 59.06 (dd,J=4.1, 1.9 Hz, 1H), 8.16-8.05 (m, 2H), (0395) 7.92 (d,J= 16.0 Hz, 1H), 7.54 (d,J= 8.3 Hz, 1H), 7.39 (dd,J= 8.0, 4.1 Hz, 1H), 7.25 (d, J= 1.4 Hz, 1H), 7.13-7.04 (m, 3H), 6.98 – 6.86 (m, 2H), 6.32 (dd,J=8.8, 7.2 Hz, 1H), 4.17 – 4.05 (m, 3H), 4.02 – 3.95 (m, 1H), 3.88 (s, 3H), 3.64 – 3.55 (m, 1H), 3.34 – 3.25 (m, 1H), 3.05 – 2.92 (m, 2H), 1.20 (t, J= 7.2 Hz, 3H). HPLC retention time (Method 1): 2.430 min.; LCMS (ES): m/z 515.1 [M+H]+ (0396) IE.: NMR (500MHz, CDCB) delta 9.04 (dd,J=4.1, 1.9 Hz, 1H), 8.07 (dt,J=8.0, 1.5 Hz, 2H), 7.95 (d, J= 8.3 Hz, 2H), 7.48 – 7.31 (m, 4H), 7.08 – 7.00 (m, 2H), 6.93 – 6.83 (m, 1H), 6.81 (d,J=1.7Hz, 1H), 6.52 (d,J=1.7Hz, 1H), 6.23 (dd,J=8.7, 7.3 Hz, 1H), 4.26 (t, J= 7.4 Hz, 1H), 4.07 (q, J= 7.1 Hz, 2H), 3.92 – 3.79 (m, 4H), 3.77 – 3.68 (m, 1H), 3.48 – 3.33 (m, 5H), 3.20 – 3.08 (m, 1H), 3.02 – 2.81 (m, 3H), 1.12 (t,J= 7.2 Hz, 3H). HPLC retention time (Method 1): 2.430 min.; LCMS (ES): m/z 659.2 [M+H]+.

With the complex challenges of chemical substances, we look forward to future research findings about 1569-16-0,belong naphthyridine compound

Reference£º
Patent; BRISTOL-MYERS SQUIBB COMPANY; ZHAO, Guohua; MIGNONE, James; (95 pag.)WO2019/94319; (2019); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem