Heterocyclic Building Blocks-Naphthyridine

As a common heterocyclic compound, it belongs to naphthyridine compound, name is 7-Bromo-2-chloro-1,5-naphthyridine, and cas is 1309774-03-5, its synthesis route is as follows.,1309774-03-5

0490-1 A suspension of 7-bromo-2-chloro-1,5-naphthyridine (183 mg), bis(pinacolato)diboron (190 mg), (1,1′-bis(diphenylphosphino)ferrocene)palladium(II) dichloride (46 mg), and potassium acetate (147 mg) in 1,4-dioxane (2 mL) was stirred at 100 C. for 1 hour in a nitrogen atmosphere. tert-Butyl 3-(4-bromo-1H-pyrazol-1-yl)azetidine-1-carboxylate (151 mg), sodium carbonate (106 mg) and bis(di-tert-butyl(4-dimethylaminophenyl)phosphine)dichloropalladium(II) (18 mg) were added to the reaction mixture, followed by stirring at 110 C. for 1 hour. After the reaction mixture was cooled to room temperature, ethyl acetate and water were added thereto. The organic layer was collected by separation, washed with a saturated sodium chloride aqueous solution, and dried over anhydrous sodium sulfate, and the solvent was distilled off under reduced pressure. The obtained residue was purified by silica gel column chromatography (ethyl acetate-hexane), thereby obtaining tert-butyl 3-(4-(6-chloro-1,5-naphthyridin-3-yl)-1H-pyrazol-1-yl)azetidine-1-carboxylate (63 mg) as a white solid. MS m/z (M+H): 386.

With the complex challenges of chemical substances, we look forward to future research findings about 1309774-03-5,belong naphthyridine compound

Reference£º
Patent; FUJIFILM Corporation; FURUYAMA, Hidetomo; KURIHARA, Hideki; TERAO, Takahiro; NAKAGAWA, Daisuke; TANABE, Shintaro; KATO, Takayuki; YAMAMOTO, Masahiko; SEKINE, Shinichiro; MASHIKO, Tomoyuki; INUKI, Shinsuke; UEDA, Satoshi; US2015/322063; (2015); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

As a common heterocyclic compound, it belongs to quinuclidine compound,Quinuclidine-4-carboxylic acid hydrochloride,40117-63-3,Molecular formula: C8H14ClNO383,mainly used in chemical industry, its synthesis route is as follows.,100361-18-0

A SOLUTION OF AMINE 31 (612 MG, 1.57 MMOL) and triethylamine (0.7 mL, 5.0 MMOL) in ACETONITRILE (4 mL) was treated with 7-CHLORO-1-CYCLOPROPYL-6-FLUORO-4-OXO-1, 4-dihydro-naphthpyridine- 3-carboxylic acid (222 mg, 0.787 MMOL) under nitrogen and the reaction mixture was allowed to stir for 12 h. The resulting mixture was concentrated in vacuo, and the residue was washed with water (3 X 10 mL). The residue was allowed to dry for 15 min. The solid was collected, resuspended in methanol (5 mL) and the reaction mixture was treated with hydrazine (1 mL). After 5 min, the reaction mixture was warmed to reflux and the resulting mixture was allowed to stir for 1 h. The reaction mixture was concentrated in vacuo, diluted with water and the solids were collected by filtration. The off white product was washed with water (3 x 20 mL), allowed to dry overnight to afford the title compound 1 (40.4 mg, 13%). MS 391 (M+H).

With the synthetic route has been constantly updated, we look forward to future research findings about 7-Chloro-1-cyclopropyl-6-fluoro-1,4-dihydro-4-oxo-1,8-naphthyridine-3-carboxylic Acid,belong naphthyridine compound

Reference£º
Patent; JANSSEN PHARMACEUTICA, N.V.; WO2005/33108; (2005); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

As a common heterocyclic compound, it belongs to naphthyridine compound, name is Ethyl 7-chloro-1-(2,4-difluorophenyl)-6-fluoro-4-oxo-1,4-dihydro-1,8-naphthyridine-3-carboxylate, and cas is 100491-29-0, its synthesis route is as follows.,100491-29-0

EXAMPLE 1 Ethyl 7-chloro-1-(2,4-difluoro-5-nitrophenyl)-6-fluoro-1,4-dihydro-4-oxo-1,8-naphthyridine-3-carboxylate To 8 ml of conc. sulfuric acid was added 2.00 grams of ethyl 7-chloro-1-(2,4-difluorophenyl)-6-fluoro-4-oxo-1,4-dihydro-1,8-naphthyridine-3-carboxylate. With ice cooling and stirring, to the solution was added 600 mg of potassium nitrate in portions. The solution was stirred at room temperature for 30 minutes to complete nitration. Then the reaction solution was poured into a stirred mixture of 150 ml of chloroform and 100 ml of ice water. After stirring at room temperature for 15 minutes, the reaction solution separated. The chloroform layer was dried over anhydrous magnesium sulfate and then concentrated in vacua. The precipitated crystals were dispersed in ethanol, collected by filtration and washed with ethanol and then with diisopropyl ether to give 2.08 g of the title compound.

With the complex challenges of chemical substances, we look forward to future research findings about 100491-29-0,belong naphthyridine compound

Reference£º
Patent; Wakunaga Seiyaku Kabushiki Kaisha; US5910498; (1999); A;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

8-Chloro-2-methoxy-1,5-naphthyridine, cas is 249889-68-7, it is a common heterocyclic compound, the naphthyridine compound, its synthesis route is as follows.

2-Phenyl-[1,8]naphthyridin-3-ol (57 mg), 8-chloro-2-methoxy-[1,5]naphthyridine (50 mg), and 4-dimethylaminopyridine (94 mg) were suspended in 1,2-dichlorobenzene (1.5 ml), and the suspension was stirred at 130C for 8 hr. The reaction mixture was cooled to room temperature, and an aqueous sodium hydrogencarbonate solution was added to the reaction mixture. The organic layer was extracted with chloroform, and the chloroform layer was then washed with water and saturated brine and was dried over anhydrous sodium sulfate. The solvent was removed by distillation under the reduced pressure, and the residue was purified by thin layer chromatography with a methanol-chloroform system to give the title compound (27 mg, yield 28%). 1H-NMR (CDCl3, 400 MHz): delta 3.68 (s, 3H), 7.15 (d, J = 9.0 Hz, 1H), 7.18 (d, J = 5.1 Hz, 1H), 7.40 – 7.42 (m, 3H), 7.46 (dd, J = 4.4, 8.3 Hz, 1H), 7.58 (s, 1H), 8.03 (dd, J = 2.0, 8.3 Hz, 1H), 8.32 (d, J = 9.3 Hz, 1H), 8.38 – 8.41 (m, 2H), 8.69 (d, J = 5.1 Hz, 1H), 9.10 (dd, J = 2.0, 4.1 Hz, 1H) Mass spectrometric value (ESI-MS, m/z): 403 (M+Na)+, 249889-68-7

With the rapid development of chemical substances, we look forward to future research findings about 8-Chloro-2-methoxy-1,5-naphthyridine

Reference£º
Patent; KIRIN BEER KABUSHIKI KAISHA; EP1724268; (2006); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

As a common heterocyclic compound, it belong naphthyridine compound,7-Chloro-1,8-naphthyridin-2-ol,15944-34-0,Molecular formula: C8H5ClN2O,mainly used in chemical industry, its synthesis route is as follows.,15944-34-0

A mixture of 7-chloro-l,8-naphthyridin-2(lH)-one (52-1) (1.26 g, 7 mmol) and cesium carbonate (4.56 g, 14 mmol) was stirred at 115 C overnight. The mixture was diluted with methanol (6 mL) and purified by reverse phase column chromatography (acetonitrile : water = 17:83, with 0.01% NH4OH) to afford compound 52-2 (1.15 g, 70% yield) as a light yellow solid. MS (ESI): m/z 235 [M+H]+.

With the synthetic route has been constantly updated, we look forward to future research findings about 7-Chloro-1,8-naphthyridin-2-ol,belong naphthyridine compound

Reference£º
Patent; SUNOVION PHARMACEUTICALS INC.; JONES, Phillip, G.; LEW, Robert; SPEAR, Kerry, L.; XIE, Linghong; WO2013/169964; (2013); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

It is a common heterocyclic compound, the naphthyridine compound, 7-Bromo-2-chloro-1,5-naphthyridine, cas is 1309774-03-5 its synthesis route is as follows.,1309774-03-5

0003-1 A mixture of 7-bromo-2-chloro-1,5-naphthyridine (30 mg), 1,3,4-thiadiazole-2-amine (25 mg) and potassium carbonate (17 mg) in dimethylsulfoxide (0.5 mL) was stirred at 150 C. for 30 minutes using a microwave reaction apparatus. The reaction mixture was cooled to room temperature, and water was added thereto. The solid matter was collected by filtration, thereby obtaining N-(7-bromo-1,5-naphthyridin-2-yl)-1,3,4-thiadiazole-2-amine.

With the complex challenges of chemical substances, we look forward to future research findings about 7-Bromo-2-chloro-1,5-naphthyridine

Reference£º
Patent; FUJIFILM Corporation; FURUYAMA, Hidetomo; KURIHARA, Hideki; TERAO, Takahiro; NAKAGAWA, Daisuke; TANABE, Shintaro; KATO, Takayuki; YAMAMOTO, Masahiko; SEKINE, Shinichiro; MASHIKO, Tomoyuki; INUKI, Shinsuke; UEDA, Satoshi; US2015/322063; (2015); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

Name is 2-Chloro-1,5-naphthyridine, as a common heterocyclic compound, it belongs to naphthyridine compound, and cas is 7689-62-5, its synthesis route is as follows.,7689-62-5

A glass microwave reaction vessel was charged with 1-(trans-3-aminocyclobutyl)-3-cyclopropyl-1H-imidazo[4,5-b]pyrazin-2(3H)-one hydrochloride (Intermediate 79, 0.133 g, 0.472 mmol), 2-chloro-1,5-naphthyridine (0.100 g, 0.608 mmol) and DMSO (2 mL). N,N-Diisopropylethylamine (0.250 mL, 1.437 mmol) was added and the reaction mixture was sealed under argon and heated at 100 C. for 59 h. The reaction was cooled to room temperature and partitioned between water/DCM. The aqueous layer was extracted with DCM (3*) and the combined organic layers were evaporated onto silica gel and purified by flash chromatography (Isco, (25 gram)) eluting with 2M NH3 in MeOH:CH2Cl2 (0:1?1:19) to give 67 mg (34%) of a white crystalline solid. ESI-MS 374.0 [M+1]. 1H NMR (400 MHz, DMSO-d6) delta ppm 8.49 (dd, J=4.30, 1.56 Hz, 1H), 8.00 (d, J=3.33 Hz, 1H), 7.97 (d, J=3.33 Hz, 1H), 7.93 (d, J=9.19 Hz, 1H), 7.81-7.89 (m, 2H), 7.46 (dd, J=8.41, 4.11 Hz, 1H), 7.02 (d, J=9.19 Hz, 1H), 5.21 (m, 1H), 4.64-4.76 (m, 1H), 3.25-3.38 (m, 2H), 2.91-3.02 (m, 1H), 2.34-2.45 (m, 2H), 0.94-1.11 (m, 4H)

With the complex challenges of chemical substances, we look forward to future research findings about 2-Chloro-1,5-naphthyridine

Reference£º
Patent; AMGEN INC.; Allen, Jennifer R.; Amegadzie, Albert; Andrews, Kristin L.; Brown, James; Chen, Jian J.; Chen, Ning; Harrington, Essa Hu; Liu, Qingyian; Nguyen, Thomas T.; Pickrell, Alexander J.; Qian, Wenyuan; Rumfelt, Shannon; Rzasa, Robert M.; Yuan, Chester Chenguang; Zhong, Wenge; US2013/225552; (2013); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

It is a common heterocyclic compound, the naphthyridine compound, 7-Bromo-2-chloro-1,5-naphthyridine, cas is 1309774-03-5 its synthesis route is as follows.,1309774-03-5

0022-1 Several drops of a 4 mol/L hydrogen chloride-1,4-dioxane solution (3 mL) and water were added to 7-bromo-2-chloro-1,5-naphthyridine (250 mg), followed by stirring at 100 C. overnight. The reaction mixture was cooled to room temperature, and water was added thereto. The solid matter was collected by filtration, and washed with a mixture solution of water and hexane-ethyl acetate (1:1), thereby obtaining 7-bromo-1,5-naphthyridin-2-ol (190 mg) as a grey solid. 1H-NMR (DMSO-d6) delta: 11.96 (1H, brs), 8.56 (1H, d, J=2.3 Hz), 7.93 (1H, d, J=9.9 Hz), 7.85 (1H, d, J=2.30 Hz), 6.79 (1H, d, J=9.9 Hz).

With the complex challenges of chemical substances, we look forward to future research findings about 7-Bromo-2-chloro-1,5-naphthyridine

Reference£º
Patent; FUJIFILM Corporation; FURUYAMA, Hidetomo; KURIHARA, Hideki; TERAO, Takahiro; NAKAGAWA, Daisuke; TANABE, Shintaro; KATO, Takayuki; YAMAMOTO, Masahiko; SEKINE, Shinichiro; MASHIKO, Tomoyuki; INUKI, Shinsuke; UEDA, Satoshi; US2015/322063; (2015); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

1,8-Naphthyridine-2-carboxylic acid, cas is 215523-34-5, it is a common heterocyclic compound, the naphthyridine compound, its synthesis route is as follows.,215523-34-5

General procedure: To the resin 13 (560 mg) in DMF (2.5 mL) were added a solutionof the appropriate Fmoc-protected amino acid (see Tables 1-3)(0.3 M), PyBOP (0.3 M) and HOBt (0.3 M) in dry DMF (4.2 mL). Thesuspensions were stirred for 3 min and then DIPEA (0.6 M) wasadded. The suspensions were stirred for 3 h under an argon atmosphereat rt. The resins were washed successively with DCM(150 mL), MeOH (120 mL), DCM (75 mL) and dried overnight undervacuum to give resins 14, each bearing an appropriate Fmoc-protectedamino acid. To the resins 14 (161 mg, 0.13 mmol) wereadded a solution of piperidine (20%, v/v) in DCM (2.1 mL) and themixtures were stirred for 1 h at rt. After filtration, the resins werewashed successively with DCM (50 mL), MeOH (45 mL), DCM(25 mL) and dried under vacuum to give resins 15. Portions(65 mg) of resins 15 were placed in reactor wells (12 mL) of anautomated synthesizer reaction block (40-well format) (AdvancedChemTech). To each well was added a solution of appropriate carboxylicacid (see Tables 1-3) (0.3 M), PyBOP (0.3 M) and HOBt 6-Cl(0.3 M) and DIPEA (0.6 M) in dry DMF (2 mL). The suspensionswere vortexed at 300 rpm over a period of 5 h under an argonatmosphere. The wells were then filtered to remove the reactivesolution from the resins 16 and washed successively with THF,DCM, MeOH and DCM.

With the synthetic route has been constantly updated, we look forward to future research findings about 1,8-Naphthyridine-2-carboxylic acid,belong naphthyridine compound

Reference£º
Article; Talbot, Amelie; Maltais, Rene; Kenmogne, Lucie Carolle; Roy, Jenny; Poirier, Donald; Steroids; vol. 107; (2016); p. 55 – 64;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

It is a common heterocyclic compound, the naphthyridine compound, 7-Bromo-2-chloro-1,5-naphthyridine, cas is 1309774-03-5 its synthesis route is as follows.,1309774-03-5

0375-2 1,4-Dioxane (2 mL)/water (0.2 mL) was added to a mixture of 7-bromo-2-chloro-1,5-naphthyridine (75 mg), 2-((4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)-1H-pyrazol-1-yl)methyl)pyridine (105 mg), bis(di-tert-butyl(4-dimethylaminophenyl)phosphine)dichloropalladium(II) (21 mg), and sodium carbonate (65 mg), followed by stirring at 100 C. for 2 hours. After the reaction mixture was cooled to room temperature, the insolubles were filtered off using celite, and the filter cake was washed with ethyl acetate. The filtrate and the washings were combined, and the solvent was distilled off under reduced pressure. The obtained residue was purified by silica gel column chromatography (ethyl acetate-hexane, methanol-ethyl acetate, NH silica), thereby obtaining 2-chloro-7-(1-(pyridin-2-ylmethyl)-1H-pyrazol-4-yl)-1,5-naphthyridine (64 mg) as a yellow solid. MS m/z (M+H): 322.

With the complex challenges of chemical substances, we look forward to future research findings about 7-Bromo-2-chloro-1,5-naphthyridine

Reference£º
Patent; FUJIFILM Corporation; FURUYAMA, Hidetomo; KURIHARA, Hideki; TERAO, Takahiro; NAKAGAWA, Daisuke; TANABE, Shintaro; KATO, Takayuki; YAMAMOTO, Masahiko; SEKINE, Shinichiro; MASHIKO, Tomoyuki; INUKI, Shinsuke; UEDA, Satoshi; US2015/322063; (2015); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem