Heterocyclic Building Blocks-Naphthyridine

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.5175-14-4,2-Oxo-1,2-dihydro-1,8-naphthyridine-3-carboxylic acid,as a common compound, the synthetic route is as follows.,5175-14-4

Step 3: 3-Bromo-l,8-naphthyridin-2-olA solution of bromine (3.78 g, 23.7 mmol) in pyridine (4 mL) and DMF (8 mL) was added to the product of Step 2 (450 mg, 2.37 mmol) and heated at 1050C for 1 hour. The reaction was cooled; H2O was added, and the mixture filtered. The filtrate was extracted with EtOAc (2x). The organic layers washed with brine and saturated NH4Cl(aq.) and dried over Na2SO4. The solvent was concentrated in vacuo, and the resulting gum was triturated with DCM, and filtered to give a brown solid (156 mg) as desired product. M+H = 224.9.

The synthetic route of 5175-14-4 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; MERCK & CO., INC.; ISTITUTO DI RICERCHE DI BIOLOGIA MOLECOLARE P. ANGELETTI S.P.A.; WO2008/57209; (2008); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1569-16-0,2-Methyl[1,8]-Naphthyridine,as a common compound, the synthetic route is as follows.,1569-16-0

STEP 2. SYNTHESIS OF (E)-1-ETHOXY-2- (1, 8-NAPHTHYRIDIN-2- YL) ethanol. To the product from step 1, (81.5 G, 0.57 mol) in anhydrous THF (1.9 L) at – 40 C under Ar gas was added lithium bis (trimethylsilyl) amide (1 M in THF, 1.2 L, 1.2 MOL). After stirring for 30 min at-40 C, DIETHYLCARBONATE (72.5 mL, 0.60 mol) was added. The temperature of the reaction mixture was warmed up to 0 C and stirred for 2 h. The reaction mixture was quenched into saturated aq. NH4CI (700 mL) and the THF removed under reduced pressure. The resulting mixture was extracted with EtOAc (3 x 700 mL). The organic layers were combined, washed with brine, dried over NA2SO4, and concentrated under reduced pressure. The resulting residue was purified by flash column chromatography using 50percent EtOAc/hexane to give a yellow solid (81.2 g, 0.38 mol, 66percent).APOS;H NMR (400 MHz, DMSO-d6) 8 1.22 (t, 3H), 4.11 (q, 2H), 4.89 (s, 1H), 6.78 (d, 1H), 7.15 (dd, 1H), 7.47 (d, 1H), 7.80 (d, 1H), 8.36 (d, 1H), 11.8 (bs, 1H). LC-MS (MH+) = 217.

As the paragraph descriping shows that 1569-16-0 is playing an increasingly important role.

Reference£º
Patent; PHARMACIA CORPORATION; WO2004/58761; (2004); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

96568-07-9, Ethyl 7-chloro-1-cyclopropyl-6-fluoro-4-oxo-1,4-dihydro-1,8-naphthyridine-3-carboxylate is a naphthyridine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,96568-07-9

EXAMPLE 61 Ethyl (1’SR,2’SR,6’RS)-1-cyclopropyl-6-fluoro-1,4-dihydro-7-(2′-methylamino-8′-azabicyclo[4.3.0]non-4′-en-8′-yl)-4-oxo-1,8-naphthyridine-3-carboxylate STR201 The title compound is obtained by reacting ethyl 7-chloro-1-cyclopropyl-6-fluoro-1,4-dihydro-4-oxo-1,8-naphthyridine-3-carboxylate with the title compound from Example O, as described in Example 52. The hydrochloride is obtained by treating the product with a little dilute hydrochloric acid. Yield: 91% of theory. Rf =0.64 (methanol/dichloromethane/conc. ammonia 15:4:0.5).

The synthetic route of 96568-07-9 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Bayer Aktiengesellschaft; US5556979; (1996); A;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

17965-71-8, 3-Bromo-1,5-naphthyridine is a naphthyridine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,17965-71-8

7-Bromo-1,5-naphthyridine-1-oxide (6) To a stirring solutionof compound 5 (100 mg, 0.48 mmol) in3 mL CH2Cl2 at 0C was added m-CPBA (142 mg, 0.58 mmol) in portion for 5 min, then at roomtemperature for 2 h. Water (10 mL) was added to quench the reaction, and themixture was extracted with CH2Cl2 (3¡Á10 mL). Thecombined extracts were washed with brine, dried over anhydrous Na2SO4,and concentrated in vacuum. Purification by chromatography (PE/EA = 2:1)provided compound 6 (64 mg, 67%) asa white solid. MP: 151~152C (Ref.2 148~149C). 1H NMR(400 MHz, CDCl3): delta9.26-9.13 (m, 1H), 9.00 (dd, J = 4.7,2.3 Hz, 1H), 8.54 (d, J = 5.8 Hz, 1H),7.98 (d, J = 6.1 Hz, 1H), 7.54 (dd, J = 9.2, 5.2 Hz, 1H).

The synthetic route of 17965-71-8 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Wu, Jing-Fang; Liu, Ming-Ming; Huang, Shao-Xu; Wang, Yang; Bioorganic and Medicinal Chemistry Letters; vol. 25; 16; (2015); p. 3251 – 3255;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.15936-10-4,2-Chloro-1,8-naphthyridine,as a common compound, the synthetic route is as follows.

Description 94; 6-(1 8-Naphthyridin-2-yl) pvrimidin-4-amine; To a mixture of Description 92 (2.52 g, 15. 3 mmol), hexamethylditin (5.0 g, 15.3 mmol), lithium chloride (1.95 g, 45.9 mmol), and copper (I) iodide (291 mg, 1.53 mmol) in anhydrous 1,4-dioxane (50 ml) was added Pd (PPh3) 4 (884 g, 0.77 mmol). The mixture was de-gassed three times, and heated at 100C overnight. The mixture was cooled and diluted with EtOAc (120 ml) and washed with a 10% potassium fluoride solution (200 ml). The organic layer was washed with sat. NaCl (50 ml), dried over Na2SO4, filtered, and evaporated. The residue was taken up in anhydrous 1,4-dioxane (75 ml), and Description 93 (1.55 g, 7 mmol), lithium chloride (1.78 g, 42 mmol), and copper (I) iodide (266 mg, 1.4 mmol) added, followed by Pd (PPh3) 4 (808 mg, 0.7 mmol). The mixture was de-gassed 3 times and heated at 100C for 3 days. The mixture was poured into water (200 ml), and extracted with EtOAc (2 x 100 ml), the combined EtOAc layers were washed with water (150 ml), sat. NaCl (100 ml), dried over Na2SO4, filtered and evaporated. The residue was purified by column chromatography on silica (eluent: 2% MeOH in DCM + 0.5% NH40H) to give the title compound (100 mg, 3%).’H NMR (360 MHz, DMSO-d6) 7.18 (2 H, br s), 7.66-7. 86 (3 H, m), 8.55 (1 H, dd, J 8.1 and 1. 8), 8. 58 (1 H, d, J4. 2), 8.64 (1 H, d, J8. 4), 9.16 (1 H, dd, J4. 2 and 2.1).

15936-10-4, The synthetic route of 15936-10-4 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; MERCK SHARP & DOHME LIMITED; WO2005/47279; (2005); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

100361-18-0, 7-Chloro-1-cyclopropyl-6-fluoro-1,4-dihydro-4-oxo-1,8-naphthyridine-3-carboxylic Acid is a naphthyridine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,100361-18-0

Acetonitrile (1900ml), 3-aminomethyl-4-methoxyiminopyrrolidine dimethanesulfonate (248. Og) and water (100ml) were in turn introduced into a reaction vessel and cooled to 0- 5&deg C. Benzaldehyde (97.6g) and triethylamine (229. 1g) were in turn added to the reaction mixture. After stirring the mixture for 0. 5h, 7-chloro-1-cyclopropyl-6-fluoro-1, 4- dihydro-4-oxo-1, 8-naphthyridine-3-carboxylic acid (200. 0g) was introduced thereto. The resultant reaction mixture was slowly heated to room temperature, while stirring it. Then, the reaction was carried out by stirring the reaction mixture for about 3h at room temperature. The reaction material, which was formed in the form of a dispersion solution upon producing the title compound, was filtered, washed with water and acetonitrile, and then dried to prepare 320.3 g of the title compound (Yield: 94. 8%).’H NMR (6, CDC13) : 8.66 (s, 1H), 8. 32 (s, 1H), 7. 98 (d, J=12. 4Hz, 1H), 7.60 (d, J=7. 0Hz, 2H), 7. 37 (t, J=7.4Hz, 1H), 7.31 (t, J=7.4Hz, 2H), 4. 58 (s, 2H), 4. 21-4. 15 (m, 2H), 4.00 (m, 1H), 3.93 (s, 3H), 3.83 (m, 1H), 3.56 (m, 1H), 3.40 (m, 1H), 1.21 (m, 2H), 1.00 (m, 2H) Mass (FAB): 478 (M+H).

100361-18-0 7-Chloro-1-cyclopropyl-6-fluoro-1,4-dihydro-4-oxo-1,8-naphthyridine-3-carboxylic Acid 11055142, anaphthyridine compound, is more and more widely used in various.

Reference£º
Patent; LG LIFE SCIENCES LTD.; WO2003/87100; (2003); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

337958-60-8, 5,7-Dichloro-1,6-naphthyridine is a naphthyridine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,337958-60-8

To 5,7-dichloro-1 ,6-naphthyridine (5.01 g, 25.2mmol) and 1 , 1 -dimethylethyl (3R)-3- (aminomethyl)-3-fluoro-1 -piperidinecarboxylate (5.32g, 22.90mmol) in NMP (20ml) was added DI PEA (8.00ml, 45.8mmol) and the mixture was stirred at 100C for 72h under nitrogen. The reaction was cooled and partitioned between ethyl acetate and water (200ml each). The aqueous was washed with ethyl acetate. The combined organics were washed with water and the solvent was removed. The residue was dissolved in DCM and loaded onto a 100g silica SNAP column and purified on the SP4 eluting with 0-50% ethyl acetate in cyclohexane over 17CVs. Appropriate fractions were combined and the solvent was removed to give the title compound as a pale orange solid which was dried under high vacuum for 2h (7.61 g).LCMS (Method B): Rt = 1 .12min, MH+ 395/397

337958-60-8 5,7-Dichloro-1,6-naphthyridine 12204233, anaphthyridine compound, is more and more widely used in various.

Reference£º
Patent; GLAXO GROUP LIMITED; ATKINSON, Francis Louis; BARKER, Michael David; DOUAULT, Clement; GARTON, Neil Stuart; LIDDLE, John; PATEL, Vipulkumar Kantibhai; PRESTON, Alexander George Steven; WILSON, David Matthew; WO2011/134971; (2011); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

1375301-90-8, 3-Bromo-1,7-naphthyridin-8(7H)-one is a naphthyridine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,1375301-90-8

A mixture of compound E3 (2.0 g, 8.89 mmol), sodium methanolate (2.40 g, 44.4 mmol) and copper(I) iodide (846 mg, 4.44 mmol) in DMF (20 mL) was stirred at 100 C for 16 h under N2. Then mixture was concentrated to give crude E4 which was used in the next step without further purification.

1375301-90-8 3-Bromo-1,7-naphthyridin-8(7H)-one 89500608, anaphthyridine compound, is more and more widely used in various.

Reference£º
Patent; MERCK SHARP & DOHME CORP.; CUMMING, Jared, N.; SCOTT, Jack, D.; (65 pag.)WO2016/40226; (2016); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

1260670-05-0, 3-Bromo-8-chloro-1,7-naphthyridine is a naphthyridine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,1260670-05-0

Step 1: 3-bromo-N-(2-methylbiphenyl-3-yl)-1, 7-naphthyridin-8-amine To a microwave vial was added 2-methylbiphenyl-3-amine (Example 1, Step 1: 0.1 g, 0.546 mmol), 3-bromo-8-chloro-1,7-naphthyridine (PharmaBlock, cat#PBLJ2743: 140 mg, 0.55 mmol), tert-butyl alcohol (2.5 mL) and 4.0 M hydrogen chloride in dioxane (0.136 mL, 0.546 mmol). The resulting mixture was irradiated in the microwave to 100 C. for 1 h. The resulting mixture was concentrated, and the desired product was used directly in the next step. LC-MS calculated for C21H17N3Br (M+H)+: m/z=390.1; found 390.1.

As the paragraph descriping shows that 1260670-05-0 is playing an increasingly important role.

Reference£º
Patent; Incyte Corporation; Lajkiewicz, Neil; Wu, Liangxing; Yao, Wenqing; (58 pag.)US2017/174679; (2017); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.5912-35-6,6-Amino-8-bromo-1,7-naphthyridine,as a common compound, the synthetic route is as follows.,5912-35-6

To a stirred solution of 6-amino-8-bromo-1, 7-naphthyridine (0.5 g) in a mixture of toluene (2.5 ml), DMF (4 ml) and aqueous KZCOS (0.68 g in 2 ml water) is added bis (dibenzylideneacetone) palladium (51 mg), triphenylphosphine (47 mg) and 3- fluorophenylboronic acid (0.33 g). The mixture is stirred for 4 hours at 100C. The mixture is diluted with ethyl acetate, then filtered through a CeliteTM filter. The ethyl acetate solution is washed with 2 N NAOH and water, dried over magnesium sulphate, then concentrated to afford the title compound. MS: APCI 240.0 MH+.

5912-35-6 6-Amino-8-bromo-1,7-naphthyridine 10704335, anaphthyridine compound, is more and more widely used in various.

Reference£º
Patent; NOVARTIS AG; NOVARTIS PHARMA GMBH; WO2004/55013; (2004); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem