Tag: M.W:100-200

1569-16-0, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 2-Methyl[1,8]-Naphthyridine, cas is 1569-16-0,the naphthyridine compound, it is a common compound, a new synthetic route is introduced below.

The mixture of 2-methyl-l,8-naphthyridine (85 mg, 0.586 mmol), E25A (128 mg, 0.586 mmol), and 4-methylbenzenesulfonamide (100 mg, 0.586 mmol) in DME (10 mL) was heated at 170 ¡ãC under microwave conditions for 2 h. The mixture was purified by reverse phase ISCO (26 g C18 30 min gradient from 100percent A: 0percent B to 0percent A: 100percent B (A = 90percent H2O/10 percent ACN + 0.1percent TFA); (B = 90percent ACN/10percent H2O + 0.1percent TFA); detection at 220 nm) to yield E25B (18 mg, 5percent) as a minor byproduct. LCMS (ES): m/z 516.2 [M+H]+.

The chemical industry reduces the impact on the environment during synthesis,1569-16-0,2-Methyl[1,8]-Naphthyridine,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; BRISTOL-MYERS SQUIBB COMPANY; DEVASTHALE, Pratik; MOORE, Fang; ZHAO, Guohua; PIENIAZEK, Susan Nicole; SELVAKUMAR, Kumaravel; DHANUSU, Suresh; PANDA, Manoranjan; MARCIN, Lawrence R.; (384 pag.)WO2018/89355; (2018); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

As a common heterocyclic compound, it belongs to naphthyridine compound, name is 2-Methyl[1,8]-Naphthyridine, and cas is 1569-16-0, its synthesis route is as follows.

A stirred solution of 2-methyl-1,8-naphthyridine (57.5 g, 399 mmol) (available from Manchester Organics) and (R)-tert-butyl 3-(iodomethyl)pyrrolidine-1-carboxylate (124.2 g, 399mmcl) (Intermediate 1) in THF (1 L) was cooled to 0 ¡ãC and treated under nitrogen with a solution of lithium bis(trimethylsilyl)amide in THE (1M, 399 mL, 399 mmcl) over 20 mm and the reaction mixture was stirred at 0 ¡ãC for 3 h. The reaction was quenched with saturated ammonium chloride solution (500 mL) and water (500 mL) and ethyl acetate (1 L) was added. The layers were separated and the aqueous phase was extracted with further ethyl acetate (1 L). The combinedorganic layers were dried (MgSO4), filtered and evaporated in vacuo. The residual brown oil (162 g) was purified by chromatography on a silica cartridge (750 g) eluting with a gradient of 0 ? 100percent [ethyl acetate in (5percent MeOH ? 95percent ethyl acetate)] over 8 column volumes. The appropriate fractions were combined and evaporated in vacuo to give the title compound (46.65 g, 36percent) as an orange solid: LCMS (System A) RT=0.99 mm, 97percent, ES+ve m/z328 (M+H)?, [aiD2¡ã = + 22 (c 1.00in EtOH).

1569-16-0, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,1569-16-0 ,2-Methyl[1,8]-Naphthyridine, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; GLAXOSMITHKLINE INTELLECTUAL PROPERTY DEVELOPMENT LIMITED; ANDERSON, Niall Andrew; CAMPBELL, Ian Baxter; CAMPBELL-CRAWFORD, Matthew Howard James; HANCOCK, Ashley Paul; LEMMA, Seble; MACDONALD, Simon John Fawcett; PRITCHARD, John Martin; PROCOPIOU, Panayiotis Alexandrou; (64 pag.)WO2016/46230; (2016); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

As a common heterocyclic compound, it belongs to naphthyridine compound, name is 2-Methyl[1,8]-Naphthyridine, and cas is 1569-16-0, its synthesis route is as follows.

STEP 2. SYNTHESIS OF (E)-1-ETHOXY-2- (1, 8-NAPHTHYRIDIN-2- YL) ethanol. To the product from step 1, (81.5 G, 0.57 mol) in anhydrous THF (1.9 L) at – 40 C under Ar gas was added lithium bis (trimethylsilyl) amide (1 M in THF, 1.2 L, 1.2 MOL). After stirring for 30 min at-40 C, DIETHYLCARBONATE (72.5 mL, 0.60 mol) was added. The temperature of the reaction mixture was warmed up to 0 C and stirred for 2 h. The reaction mixture was quenched into saturated aq. NH4CI (700 mL) and the THF removed under reduced pressure. The resulting mixture was extracted with EtOAc (3 x 700 mL). The organic layers were combined, washed with brine, dried over NA2SO4, and concentrated under reduced pressure. The resulting residue was purified by flash column chromatography using 50percent EtOAc/hexane to give a yellow solid (81.2 g, 0.38 mol, 66percent).APOS;H NMR (400 MHz, DMSO-d6) 8 1.22 (t, 3H), 4.11 (q, 2H), 4.89 (s, 1H), 6.78 (d, 1H), 7.15 (dd, 1H), 7.47 (d, 1H), 7.80 (d, 1H), 8.36 (d, 1H), 11.8 (bs, 1H). LC-MS (MH+) = 217.

1569-16-0, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,1569-16-0 ,2-Methyl[1,8]-Naphthyridine, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; PHARMACIA CORPORATION; WO2004/58761; (2004); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

1569-16-0, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 2-Methyl[1,8]-Naphthyridine, cas is 1569-16-0,the naphthyridine compound, it is a common compound, a new synthetic route is introduced below.

a 2-Methyl-8-(tert-butoxycarbonyl)-5,6,7,8-tetrahydro-1,8-naphthyridine A mixture of 2-methyl-1,8-naphthyridine (J. Chem. Soc. (C) 1966, 315; 5.13 g, 35.58 mmole), 10percent Pd/C (1.14 g, 1.07 mmole), and absolute EtOH (70 mL) was deoxygenated through three evacuation/H2 purge cycles, then was stirred briskly under a balloon of H2. After 18.5 hr, the mixture was filtered through celite.(R)., and the filter pad was washed sequentially with absolute EtOH and EtOAc. The filtrate was concentrated to dryness, and the residue was reconcentrated from EtOAc to leave an off-white solid (5.25 g). A solution of the above material (5.25 g), di-tert-butyl dicarbonate (15.53 g, 71.16 mmole), and CH2Cl2 (10 mL) was concentrated on the rotavap to remove the solvent, and the oily residue was heated under N2 in an oil bath set at 55-60¡ã C. After 45 hr, the reaction was cooled to RT, and the residue was flash chromatographed on silica gel (40percent EtOAc/hexanes). The title compound (4.90 g, 55percent) was obtained as a light yellow solid: 1H NMR (300 MHz, CDCl3) delta7.27 (d, J=7.6 Hz, 1H), 6.81 (d, 7.6 Hz, 1H), 3.69 -3.79 (m, 2H), 2.65-2.75 (m, 2H), 2.48 (s, 3H), 1.83-1.98 (m, 2H), 1.52 (s, 9H), MS (ES) m/e 249 (M+H)+.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 2-Methyl[1,8]-Naphthyridine, 1569-16-0

Reference£º
Patent; SmithKline Beecham Corporation; US6495560; (2002); B1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

Name is 8-Chloro-2-methoxy-1,5-naphthyridine, as a common heterocyclic compound, it belongs to naphthyridine compound, and cas is 249889-68-7, its synthesis route is as follows.

81.i. N1-(6-methoxy-[1,5]naphthyridin-4-yl)-ethane-1,2-diamine A mixture of 8-chloro-2-methoxy-1,5-naphthyridine (1.71 g, 8.81 mmol) and ethylenediamine (1.18 mL, 2 eq.) was heated slowly to 80 C. over 1 h and subsequently up to 100 C. for 2 h. After cooling to rt, the yellow solution was taken in DCM and successively washed with NaHCO3. The aq. layer was back extracted with DCM (3 times) and the combined org. layers were concentrated to afford the title intermediate as a pale yellow oil (0.98 g, 51% yield). MS (ESI, m/z): 219.4 [M+H+].

249889-68-7, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,249889-68-7 ,8-Chloro-2-methoxy-1,5-naphthyridine, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; Actelion Pharmaceuticals Ltd.; US2010/137290; (2010); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

952059-69-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 8-Chloro-3-methoxy-1,5-naphthyridine, cas is 952059-69-7,the naphthyridine compound, it is a common compound, a new synthetic route is introduced below.

Five 20 mL microwave vials were each charged with 4-aminophenol (0.700 mg, 33 mmol) and 3 equivalents of cesium carbonate in 6.0 ml of DMF. The mixture was stirred at RT for 10 minutes. Following addition of 8-chloro-3-methoxy-1,5-naphthyridine (1 g, 26 mmol), the reaction vessels were capped and irradiated at 150 C. for 15 min in the microwave, at which time the reaction was determined complete by LCMS. The mixture was allowed to cool to ambient temperature and material from the five vessels was combined. A deep brown solid crashed out with addition of water. Filtered solids, washed with water and dried overnight in the vacuum oven to afford 4-(7-methoxy-1,5-naphthyridin-4-yloxy)benzenamine as a brown solid. [0359] Alternatively, the title compound may be prepared by the following method: In a nitrogen purged sealed pressure vessel, dissolved 4-aminophenol (0.617 g, 5.65 mmol) in DMF (0.030 L). Cesium carbonate (3.68 g, 11.3 mmol) was added and the mixture was stirred at RT for 5 min. Added 8-chloro-3-methoxy-1,5-naphthyridine (1.00 g, 5.14 mmol), heated to 90 C., stirred for 17 h. The mixture was allowed to cool to RT and was concentrated. The crude material was triturated with methanol, filtered, washed with methanol followed by water, and air dried to yield 4-(7-methoxy-1,5-naphthyridin-4-yloxy)benzenamine as brown solid. MS [M+H]=268.1; Calc’d 267.3 for C15H13N3O2.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 8-Chloro-3-methoxy-1,5-naphthyridine, 952059-69-7

Reference£º
Patent; CEE, Victor J.; DEAK, Holly L.; DU, Bingfan; GEUNS-MEYER, Stephanie D.; HUA, Zihao; MARTIN, Matthew W.; MARX, Isaac; NGUYEN, Hanh Nho; OLIVIERI, Philip R.; PANTER FABER, Kathleen; ROMERO, Karina; SCHENKEL, Laurie; WHITE, Ryan; US2014/336182; (2014); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

As a common heterocyclic compound, it belongs to naphthyridine compound, name is 1,5-Naphthyridine, and cas is 254-79-5, its synthesis route is as follows.

1,5-naphthyridine (111.6 g, 0.85 mol) was dissolved in acetic acid (1000 mL), sodium acetate (140.9 g, 1.72 mol) was added and heated to 80 C.A solution of bromine (153 g, 0.96 mol) in 150 mL was added dropwise thereto, maintaining the temperature of the reaction mixture at 80 C – 90 C, and the reaction was completed at 85 C for 3 h.After cooling, the reaction solution was spun and H2O (1000 mL) was added.The mixture was made alkaline with 50% aqueous sodium hydroxide solution, stirred for 30 min, suction filtered, and the filter cake was washed with water and dried.Crude product added to ethyl acetate (1600 mL)Heated to reflux for 3 h.After cooling to room temperature, filtration, the filter cake was washed with ethyl acetate and dried to give 3,7-dibromo-1,5-naphthyridine.The filtrate was spun dry to give a crude 3-bromo naphthyridine (84 g, white yellow solid, yield 47%).Purification by petroleum ether: ethyl acetate = 20:1 – 10:1 yielded pure 3-bromonaphthalene (67 g, white solid, yield 37%).

254-79-5, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,254-79-5 ,1,5-Naphthyridine, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; Suzhou Kangrun Pharmaceutical Co., Ltd.; Jin Haowen; Xu Weiliang; Xu Weizheng; (8 pag.)CN108658977; (2018); A;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

As a common heterocyclic compound, it belongs to naphthyridine compound, name is 2-Chloro-1,5-naphthyridine, and cas is 7689-62-5, its synthesis route is as follows.

(3) N-(2-chloro-5-(l,5-naphthyridin-2-yl)-3-pyridinyl)-4- fluorobenzenesulfonamide.; To a 50 mL round-bottomed flask was added 2-chloro-l,5- naphthyridine (54 mg, 328 mumol), N-(2-chloro-5-(4,4,5,5-tetramethyl-l,3,2-dioxaborolan-2- yl)pyridin-3-yl)-4-fluorobenzenesulfonamide (135 mg, 328 mumol), tetrakis(triphenylphosphine)palladium (38 mg, 33 mumol), sodium carbonate (70 mg, 656 mumol), dioxane (3 mL). The reaction mixture was stirred at 100 0C for 30 min. The mixture was cooled down to room temperature. The reaction mixture was diluted with water (3 mL) and extracted with EtOAc (2 X 30 mL). The organic extract was washed with saturated NaCl (2 mL), dried over Na2SO4, filtered and concentrated in vacuo and the residue was purified by silica gel chromatography, eluting with 80% EtOAc/hexanes to give N-(2-chloro-5-(l,5-naphthyridin-2- yl)pyridin-3-yl)-4-fluorobenzenesulfonamide (78 mg, 57% yield) as a white solid. MS (ESI pos. ion) m/z calc’d for Cl9H12ClFN4O2S: 414.0; found 415.0. 1H NMR (300 MHz, CHLOROFORM-^) delta ppm 7.07 (s, 1 H) 7.16 (t, J=8.55 Hz, 2 H) 7.73 (dd, J=8.55, 4.17 Hz, 1 H) 7.88 (dd, J=8.92, 4.97 Hz, 2 H) 8.11 (d, J=8.77 Hz, 1 H) 8.49 (d, J=8.48 Hz, 1 H) 8.55 (d, J=8.77 Hz, 1 H) 8.83 (d, ./=2.19 Hz, 1 H) 8.94 (d, ./==2.19 Hz, 1 H) 9.03 (dd, J=4.09, 1.61 Hz, 1 H)

7689-62-5, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,7689-62-5 ,2-Chloro-1,5-naphthyridine, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; AMGEN INC.; WO2009/155121; (2009); A2;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

7689-62-5, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 2-Chloro-1,5-naphthyridine, cas is 7689-62-5,the naphthyridine compound, it is a common compound, a new synthetic route is introduced below.

A glass microwave reaction vessel was charged with 1-(trans-4-aminocyclohexyl)-3-cyclopropyl-1H-imidazo[4,5-b]pyrazin-2(3H)-one (0.1050 g, 0.339 mmol), 2-chloro-1,5-naphthyridine (0.067 g, 0.407 mmol, 00358), and diisopropylethylamine (0.177 ml, 1.017 mmol, Sigma-Aldrich Chemical Company, Inc.) in DMSO (0.484 ml) and heated to 120 C. for 2 days. The crude product was purified by reverse-phase preparative HPLC using a Phenomenex Gemini column, 10 micron, 100*50 mm, 0.1% TFA in CH3CN/H2O, gradient 10% to 90% over 15 min. Fractions containing product were collected and concentrated. The product was taken up in DCM and loaded onto a Silicycle Si-carbonate cartridge and washed with DCM and MeOH to remove any salts to give the title compound (6.4 mg, 0.016 mmol, 4.7% yield). LCMS showed product peak at 1.434 min (m+1=402.0). 1H NMR (400 MHz, CHLOROFORM-d) delta ppm 1.09-1.24 (m, 4H) 1.37-1.53 (m, 2H) 1.94 (d, J=11.93 Hz, 2H) 2.39 (d, J=12.13 Hz, 2H) 2.68 (qd, J=12.91, 3.13 Hz, 2H) 2.97-3.09 (m, 1H) 4.08-4.24 (m, 1H) 4.47 (tt, J=12.32, 3.91 Hz, 1H) 6.85 (d, J=9.19 Hz, 1H) 7.45 (dd, J=8.41, 4.30 Hz, 1H) 7.91-7.96 (m, 2H) 7.97 (d, J=8.61 Hz, 1H) 8.03 (d, J=9.19 Hz, 1H) 8.60 (d, J=3.33 Hz, 1H)

The chemical industry reduces the impact on the environment during synthesis,7689-62-5,2-Chloro-1,5-naphthyridine,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; AMGEN INC.; Allen, Jennifer R.; Amegadzie, Albert; Andrews, Kristin L.; Brown, James; Chen, Jian J.; Chen, Ning; Harrington, Essa Hu; Liu, Qingyian; Nguyen, Thomas T.; Pickrell, Alexander J.; Qian, Wenyuan; Rumfelt, Shannon; Rzasa, Robert M.; Yuan, Chester Chenguang; Zhong, Wenge; US2013/225552; (2013); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

It is a common heterocyclic compound, the naphthyridine compound, 7-Chloro-1,8-naphthyridin-2-ol, cas is 15944-34-0 its synthesis route is as follows.

Preparation B 7-methoxy-1H-[1,8]naphthyridin-2-one To a solution of 7-chloro-1H-[1,8]naphthyridin-2-one (prepared as described in J. Org. Chem. (1990), 55, 4744; 5.36 g, 29.68 mmol) in MeOH (98 mL) was added NaOMe (25 wt % in MeOH, 161 mL). The resulting solution was stirred at reflux for 15 h. The solvent was removed in vacuo. Water (100 mL) and EA (80 mL) were added. The phases were separated and the aq. layer was extracted with EA (8*80 mL). The combined org. layers were washed with brine (50 mL), dried over MgSO4, filtered and evaporated under reduced pressure. The title compound was obtained as a beige solid (5.22 g, 100% yield). 1H NMR (d6DMSO) delta: 11.96 (s, 1H); 7.96 (d, J=8.5 Hz, 1H); 7.81 (d, J=9.4 Hz, 1H); 6.63 (d, J=8.5 Hz, 1H); 6.34 (d, J=9.4 Hz, 1H); 3.90 (s, 3H).

15944-34-0, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,15944-34-0 ,7-Chloro-1,8-naphthyridin-2-ol, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; Actelion Pharmaceuticals Ltd.; US2012/40989; (2012); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem