Tag: M.W:100-200

As a common heterocyclic compound, it belongs to naphthyridine compound, name is 2,5-Dichloro-1,8-naphthyridine, and cas is 91870-15-4, its synthesis route is as follows.,91870-15-4

The product from Example 21d (0.67 g, 3.36 mmol) and the product from Example9c (0.78 g, 3.36 mmol) in 10 mL ethanol were heated under reflux for 5.5 hr. The reaction mixture was cooled to room temperature and the solvent was removed concentrated under vacuum leaving yellow solid that was used without further purification (1.43 g, 100 percent).

91870-15-4 is used more and more widely, we look forward to future research findings about 2,5-Dichloro-1,8-naphthyridine

Reference£º
Patent; ABBOTT LABORATORIES; WO2008/133753; (2008); A2;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

As a common heterocyclic compound, it belongs to naphthyridine compound, name is 8-Chloro-3-methoxy-1,5-naphthyridine, and cas is 952059-69-7, its synthesis route is as follows.,952059-69-7

A 0.5 – 2 mL microwave vial was charged with 1- (4- (3- (aminomethyl) – [1,2,4] triazolo [4, 3-b] pyridazin-6-yl) -2- fluorophenyl)pyrrolidin-2-one (0.0792 g, 0.243 mmol), 8-chloro- 3-methoxy-l, 5-naphthyridine (0.0590 g, 0.303 mmol), and butan- 2-ol (1.00 ml, 0.243 mmol), sealed, then placed in a Personal Chemistry Microwave for 4 hours at 1200C. The mixture was concentrated, then triturated with MeOH to give 1- (2-fluoro-4- (3- ( (7-methoxy-l, 5-naphthyridin-4-ylamino) methyl) – [1,2,4] triazolo [4, 3-b] pyridazin-6-yl) phenyl)pyrrolidin-2-one as the hydrochloric salt .MS (ESI pos. ion) m/z: 485 (MH+). Calc’d exact mass for C25H2IFN8O2: 484.

With the complex challenges of chemical substances, we look forward to future research findings about 952059-69-7,belong naphthyridine compound

Reference£º
Patent; AMGEN INC.; WO2008/8539; (2008); A2;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.952059-69-7,8-Chloro-3-methoxy-1,5-naphthyridine,as a common compound, the synthetic route is as follows.

952059-69-7, (6- (3-methylisothiazol-5-yl) – [1,2,4] triazolo [4, 3-b] pyridazin-3- yDmethanamine (548 mg, 2225 mumol) and 8-chloro-3-methoxy-l, 5- naphthyridine (576 mg, 2959 mumol) were charged in a microwave vial. 2-butanol (7 mL) was added and the reaction mixture was stirred at 1200C under micro-waves irradiation for 8h. 2M NH3 in MeOH was added. Purification by MPLC (DCM/MeOH+l%NH4OH: 100/0 to 90/10) afforded the title compound (720 mg, 80% yield). MS m/z = 405.1 [M+H]+. Calc’d for C19H16N8OS: 404.46

As the paragraph descriping shows that 952059-69-7 is playing an increasingly important role.

Reference£º
Patent; AMGEN INC.; WO2008/8539; (2008); A2;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

Name is 1,8-Naphthyridine-2-carboxylic acid, as a common heterocyclic compound, it belongs to naphthyridine compound, and cas is 215523-34-5, its synthesis route is as follows.,215523-34-5

General procedure: To the resin 13 (560 mg) in DMF (2.5 mL) were added a solutionof the appropriate Fmoc-protected amino acid (see Tables 1-3)(0.3 M), PyBOP (0.3 M) and HOBt (0.3 M) in dry DMF (4.2 mL). Thesuspensions were stirred for 3 min and then DIPEA (0.6 M) wasadded. The suspensions were stirred for 3 h under an argon atmosphereat rt. The resins were washed successively with DCM(150 mL), MeOH (120 mL), DCM (75 mL) and dried overnight undervacuum to give resins 14, each bearing an appropriate Fmoc-protectedamino acid. To the resins 14 (161 mg, 0.13 mmol) wereadded a solution of piperidine (20%, v/v) in DCM (2.1 mL) and themixtures were stirred for 1 h at rt. After filtration, the resins werewashed successively with DCM (50 mL), MeOH (45 mL), DCM(25 mL) and dried under vacuum to give resins 15. Portions(65 mg) of resins 15 were placed in reactor wells (12 mL) of anautomated synthesizer reaction block (40-well format) (AdvancedChemTech). To each well was added a solution of appropriate carboxylicacid (see Tables 1-3) (0.3 M), PyBOP (0.3 M) and HOBt 6-Cl(0.3 M) and DIPEA (0.6 M) in dry DMF (2 mL). The suspensionswere vortexed at 300 rpm over a period of 5 h under an argonatmosphere. The wells were then filtered to remove the reactivesolution from the resins 16 and washed successively with THF,DCM, MeOH and DCM.

With the complex challenges of chemical substances, we look forward to future research findings about 1,8-Naphthyridine-2-carboxylic acid

Reference£º
Article; Talbot, Amelie; Maltais, Rene; Kenmogne, Lucie Carolle; Roy, Jenny; Poirier, Donald; Steroids; vol. 107; (2016); p. 55 – 64;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

As a common heterocyclic compound, it belongs to naphthyridine compound, name is 1,8-Naphthyridine-2-carboxylic acid, and cas is 215523-34-5, its synthesis route is as follows.,215523-34-5

To a solution OF 4- [ (4-BROMOPHENYL) (ethoxyimino) methyl]-1-(4-methyl-4- piperidinyl) piperidine (50 mg, 0.12 MMOL), 1, 8-naphthyridine-2-carboxylic acid (25 mg, 0.14 MMOL), and Et3N (44 mg, 0.43 MMOL) in DMF (3 mL, anhydrous) was added HATU (60 mg, 0.16 MMOL) at room temperature. After 16 h the reaction mixture was poured into ice water, and the solid was collected by filtration. The solid was dissolved in CH2CI2 and dried over NA2S04. Concentration in vacuo, and purification by preparative TLC (CH2CI2-MEOH, 9: 1) afforded the title compound as a light brown powder. MS: 564 (M+).

With the complex challenges of chemical substances, we look forward to future research findings about 215523-34-5,belong naphthyridine compound

Reference£º
Patent; SCHERING AKTIENGESELLSCHAFT; WO2004/113323; (2004); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

1,5-Naphthyridine, cas is 254-79-5, it is a common heterocyclic compound, the naphthyridine compound, its synthesis route is as follows.

Example 12; 220 221 222Part A: To a solution of compound 220 (1.0Og, 6.02 mmol) in carbon tetrachloride (60 ml_) was added dropwise, bromine (1.15 g, 7.20 mmol) as a carbon tetrachloride solution (6 mL). The resulting solution was refluxed for 1 hour. Pyridine (0.5 ml_, 6.0 mmol) as a carbon tetrachloride solution (10 mL) was added over a period of 1 hour to the refluxing reaction mixture. The reaction was stirred at reflux for 16 hours at which time LC-MS indicated that the reaction was complete. The reaction mixture was cooled to room temperature, resulting in the formation of a precipitate, which was filtered. The carbon tetrachloride filtrate was set aside. The collected brown solid was taken up in 10% NaOH (100 mL) and stirred at room temperature for 1 hour. This solution was extratcted with chloroform. The chloroform and carbon tetrachloride solutions were combined and concentrated in vacuum. Purification by column chromatography (Sitheta2, 20% EtOAc / DCM) afforded compound 221 as a white solid 0.17 g, (14%). 1H NMR (400 MHz, DMSO-d6) delta 9.07 (d, 1 H), 9.02 (dd, 1 H), 8.74 (m, 1 H), 8.45 (m, 1 H), 7.83 (dd, 1 H)., 254-79-5

With the rapid development of chemical substances, we look forward to future research findings about 1,5-Naphthyridine

Reference£º
Patent; SCHERING CORPORATION; WO2008/82487; (2008); A2;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

Name is 2-Methyl[1,8]-Naphthyridine, as a common heterocyclic compound, it belongs to naphthyridine compound, and cas is 1569-16-0, its synthesis route is as follows.,1569-16-0

a 2-Methyl-8-(tert-butoxycarbonyl)-5,6,7,8-tetrahydro-1,8-naphthyridine A mixture of 2-methyl-1,8-naphthyridine (J. Chem. Soc. (C) 1966, 315; 5.13 g, 35.58 mmole), 10percent Pd/C (1.14 g, 1.07 mmole), and absolute EtOH (70 mL) was deoxygenated through three evacuation/H2 purge cycles, then was stirred briskly under a balloon of H2. After 18.5 hr, the mixture was filtered through celite.(R)., and the filter pad was washed sequentially with absolute EtOH and EtOAc. The filtrate was concentrated to dryness, and the residue was reconcentrated from EtOAc to leave an off-white solid (5.25 g). A solution of the above material (5.25 g), di-tert-butyl dicarbonate (15.53 g, 71.16 mmole), and CH2Cl2 (10 mL) was concentrated on the rotavap to remove the solvent, and the oily residue was heated under N2 in an oil bath set at 55-60¡ã C. After 45 hr, the reaction was cooled to RT, and the residue was flash chromatographed on silica gel (40percent EtOAc/hexanes). The title compound (4.90 g, 55percent) was obtained as a light yellow solid: 1H NMR (300 MHz, CDCl3) delta7.27 (d, J=7.6 Hz, 1H), 6.81 (d, 7.6 Hz, 1H), 3.69 -3.79 (m, 2H), 2.65-2.75 (m, 2H), 2.48 (s, 3H), 1.83-1.98 (m, 2H), 1.52 (s, 9H), MS (ES) m/e 249 (M+H)+.

With the complex challenges of chemical substances, we look forward to future research findings about 2-Methyl[1,8]-Naphthyridine

Reference£º
Patent; SmithKline Beecham Corporation; US6495560; (2002); B1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

As a common heterocyclic compound, it belongs to quinuclidine compound,Quinuclidine-4-carboxylic acid hydrochloride,40117-63-3,Molecular formula: C8H14ClNO263,mainly used in chemical industry, its synthesis route is as follows.,1569-16-0

In the second step, 2-methyl-1,8-naphthyridine (27 mmol, 3.8 g) was dissolved in diethyl ether (50 mL) under a nitrogen atmosphere, and then cooled to -78¡ã C., and added dropwise with stirring (0.5 h increments). (b) Diethyl ether solution (20mL) of CH3-Li (32mmol, 1.6M, purchased from JV of BAHL Technology, Inc.), and then warmed to room temperature (25¡ãC) and stirred for 12h. The reaction was quenched by adding 15mL of saturated aqueous ammonium chloride. The organic layer was separated and the aqueous layer was extracted with chloroform three times. The organic layers were combined and dried over anhydrous Na2SO4. The solvent was evaporated under reduced pressure to give an orange-red oil. KMnO4 (96 mmol, 15.2 g, purchased from Beijing Chemical Industry Plant) was added at room temperature. After stirring for 6 h at 25¡ã C., the mixture was suction filtered, and the filtrate was evaporated under reduced pressure to obtain a crude solid product, which was further purified by column chromatography (petroleum ether/ethyl acetate mixture with a volume ratio of 100/1). A compound (known compound) having the structure represented by the formula (1-1) is obtained,The yield was 75percent.

With the synthetic route has been constantly updated, we look forward to future research findings about 2-Methyl[1,8]-Naphthyridine,belong naphthyridine compound

Reference£º
Patent; Chinese Academy Of Sciences Chemical Institute; Fan Qinghua; Ma Wenpeng; Chen Fei; He Yanmei; (51 pag.)CN105111208; (2018); B;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

As a common heterocyclic compound, it belongs to quinuclidine compound,Quinuclidine-4-carboxylic acid hydrochloride,40117-63-3,Molecular formula: C8H14ClNO4,mainly used in chemical industry, its synthesis route is as follows.,10261-82-2

A 250 mL round bottomed flask charged with 1,5-naphthyridin-2(1H)-one (2.98 g, 20.37 mmol) and phosphorus oxychloride (40 ml, 437 mmol) was heated at 100 C. for 3 h. The reaction was cooled to room temperature and excess POCl3 was removed in vacuo. The residue was poured onto ice and neutralized with NaHCO3. The mixture was extracted with DCM (4*) and the combined organic layers were evaporated onto silica gel and purified by flash chromatography (ISCO (80 gram)) eluting with EtOAc:DCM (0:1?1:4) to give 1.08 g (32%, 2 steps) of a light-yellow amorphous solid. ESI-MS 164.9, 166.9 [M+1].

With the synthetic route has been constantly updated, we look forward to future research findings about 1,5-Naphthyridin-2(1H)-one,belong naphthyridine compound

Reference£º
Patent; AMGEN INC.; Allen, Jennifer R.; Amegadzie, Albert; Andrews, Kristin L.; Brown, James; Chen, Jian J.; Chen, Ning; Harrington, Essa Hu; Liu, Qingyian; Nguyen, Thomas T.; Pickrell, Alexander J.; Qian, Wenyuan; Rumfelt, Shannon; Rzasa, Robert M.; Yuan, Chester Chenguang; Zhong, Wenge; US2013/225552; (2013); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

As a common heterocyclic compound, it belong naphthyridine compound,5,7-Dichloro-1,6-naphthyridine,337958-60-8,Molecular formula: C8H4Cl2N2,mainly used in chemical industry, its synthesis route is as follows.,337958-60-8

To an ice cooled solution of 1 ,1-dimethylethyl (3S)-3-fluoro-3-(hydroxymethyl)-1 – piperidinecarboxylate (1.406g, 6.03mmol) in DMF (20ml) was added sodium hydride (0.313g, 7.84mmol) (60% dispersion in mineral oil). This was stirred for 15min before adding 5,7-dichloro-1 ,6-naphthyridine (1 .2g, 6.03mmol). This was warmed to room temp and stirred for 4h. The reaction had gone to completion and so was cautiously quenched with aqueous ammonium chloride before partitioning between aqueous ammonium chloride and ethyl acetate. The layers were separated and the aqueous was re-extracted with ethyl acetate. The combined organics were washed with brine and concentrated in vacuo to give the crude product. This was dissolved in DCM and purified through silica (50g), eluting with a gradient of 0-50% ethyl acetate in DCM. Appropriate fractions were concentrated in vacuo to yield the title compound as a cream foamy gum (1.91 g).LCMS: Rt = 1.18min, MH+ = 395.85

With the synthetic route has been constantly updated, we look forward to future research findings about 5,7-Dichloro-1,6-naphthyridine,belong naphthyridine compound

Reference£º
Patent; GLAXO GROUP LIMITED; ATKINSON, Francis Louis; BARKER, Michael David; DOUAULT, Clement; GARTON, Neil Stuart; LIDDLE, John; PATEL, Vipulkumar Kantibhai; PRESTON, Alexander George Steven; WILSON, David Matthew; WO2011/134971; (2011); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem