M.W:200-300 | Page 101 of 115 | Heterocyclic Building Blocks-Naphthyridine

Analyzing the synthesis route of 3-Bromo-1,7-naphthyridin-8(7H)-one

With the synthetic route has been constantly updated, we look forward to future research findings about 3-Bromo-1,7-naphthyridin-8(7H)-one,belong naphthyridine compound

As a common heterocyclic compound, it belong naphthyridine compound,3-Bromo-1,7-naphthyridin-8(7H)-one,1375301-90-8,Molecular formula: C8H5BrN2O,mainly used in chemical industry, its synthesis route is as follows.,1375301-90-8

A mixture of compound E3 (2.0 g, 8.89 mmol), sodium methanolate (2.40 g, 44.4mmol) and copper(I) iodide (846 mg, 4.44 mmol) in DMF (20 mL) was stirred at 100 C for 16 hunder N2. Then mixture was concentrated to give cmde E4 which was used in the next stepwithout further purification.

With the synthetic route has been constantly updated, we look forward to future research findings about 3-Bromo-1,7-naphthyridin-8(7H)-one,belong naphthyridine compound

Reference£º
Patent; MERCK SHARP & DOHME CORP.; SCOTT, Jack, D.; BLIZZARD, Timothy, A.; WALSH, Shawn, P.; CUMMING, Jared, N.; (105 pag.)WO2017/95759; (2017); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

The important role of 3-Bromo-8-chloro-1,7-naphthyridine

1260670-05-0 is used more and more widely, we look forward to future research findings about 3-Bromo-8-chloro-1,7-naphthyridine

As a common heterocyclic compound, it belongs to naphthyridine compound, name is 3-Bromo-8-chloro-1,7-naphthyridine, and cas is 1260670-05-0, its synthesis route is as follows.,1260670-05-0

Step 1 To a mixture of 3-bromo-8-chloro-l ,7-naphthyridine J-1 (4.00 g, 16.4 mmol), but-2-yn-l-ol (1.78 g, 24.6 mmol), Cs2C03 (8.03 g, 24.6 mmol), and 5-(di-ieri-butylphosphino)-l’,3′,5′- triphenyl-rH-l ,4′-bipyrazole (1.67 g, 3.29 mmol) in THF (40 mL) was added diacetoxypalladium (0.574 g, 1.64 mmol) under N2. The mixture was stirred at 70 C for 4 h and concentrated; the residue was purified directly by silica column chromatography (PE: EtOAc = 3: 1) to afford compound J-2. MS for J-2: m/e = 233 (M+l).

1260670-05-0 is used more and more widely, we look forward to future research findings about 3-Bromo-8-chloro-1,7-naphthyridine

Reference£º
Patent; MERCK SHARP & DOHME CORP.; WALSH, Shawn, P.; CUMMING, Jared, N.; HE, Shuwen; TAOKA, Brandon, M.; TRUONG, Quang, T.; WU, Wen-Lian; (122 pag.)WO2015/187437; (2015); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

Some tips on 959558-28-2

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 959558-28-2, 4-Bromo-2,7-naphthyridin-1-amine

959558-28-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 4-Bromo-2,7-naphthyridin-1-amine, cas is 959558-28-2,the naphthyridine compound, it is a common compound, a new synthetic route is introduced below.

A solution of Bromo compound 6a (96 mg, 0.43 mmol, 1.2 equiv), Pd(PPh3)4 (10 mol%), CuI (5 mol%) and Triphenylphosphine (10 mg) in Triethylamine (1.5 mL, 10.8 mmol, 30 equiv) was de-oxygenated using steam of Argon gas. A de-oxygenated solution of alkyne 3b (150 mg, 0.36 mmol, 1 equiv) in DMF (4 mL) was added slowly over a period of 10 min to the solution and the reaction temperature was increased to 50 C and allowed to stir 12 h. The reaction was quenched by addition of NH4Cl (5 mL) at room temperature and diluted with ethyl acetate (300 mL). The organic layer was washed with water (5 ¡Á 50 mL) and washed with brine (1 ¡Á 50 mL). Combined organic layers were dried over anhydrous sodium sulphate, filtered and concentrated in vacuo. The pure product 15 was obtained by flash column chromatography. Yield = 49%.; TLC Rf = 0.1 (10 % MeOH/CH2Cl2). 1H NMR (500 MHz, DMSO-d6) delta 10.65 (s, 1H), 9.60 (s, 1H), 8.93 (s, 1H), 8.74 (d, J = 5.7 Hz, 1H), 8.48 (s, 1H), 8.39 (s, 1H), 8.18 (s, 1H), 8.03 (d, J = 8.5 Hz, 1H), 7.92 (s, 2H), 7.88 (d, J = 5.7 Hz, 1H), 7.70 (d, J = 8.5 Hz, 1H), 3.55 (s, 2H), 2.80 (s, 3H), 2.37 (s, 8H), 2.14 (s, 3H); 13C NMR (126 MHz, DMSO) delta 164.01, 162.28, 158.58, 152.20, 149.63, 148.92, 147.44, 140.37, 138.34, 137.81, 132.86, 131.74, 127.93, 127.77, 123.97, 118.86, 117.71, 117.37, 112.05, 101.07, 92.66, 90.47, 57.90, 55.19, 53.17, 46.19, 24.28; HRMS (ESI+): calcd. for C30H29F3N7O (MH+) 560.2380, found 560.2380

Reference£º
Article; Wang, Modi; Naganna; Sintim, Herman O.; Bioorganic Chemistry; vol. 90; (2019);,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

Application of 6-Chloro-1,2,3,4-tetrahydroquinoline

1309774-03-5, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,1309774-03-5 ,7-Bromo-2-chloro-1,5-naphthyridine, other downstream synthetic routes, hurry up and to see

Name is 7-Bromo-2-chloro-1,5-naphthyridine, as a common heterocyclic compound, it belongs to naphthyridine compound, and cas is 1309774-03-5, its synthesis route is as follows.

Example 0929 N,N-dimethylacetamide (75 mL), 5-isopropylpyridazine-3-amine (5.12 g) and sodium tert-amyl oxide (9.08 g) were added to 7-bromo-2-chloro-1,5-naphthyridine (9.58 g), followed by stirring at 80 C. for 1 hour. The reaction mixture was poured into water (300 mL), and the precipitated solid was collected by filtration and washed with ethanol, thereby obtaining 7-bromo-N-(5-isopropylpyridazin-3-yl)-1,5-naphthyridine-2-amine (7.70 g) as a brown solid. 1H-NMR (DMSO-d6) delta: 10.89 (1H, s), 8.88 (1H, d, J=2.0 Hz), 8.80 (1H, d, J=2.0 Hz), 8.73 (1H, d, J=2.0 Hz), 8.48 (1H, d, J=2.0 Hz), 8.27 (1H, d, J=9.2 Hz), 7.79 (1H, d, J=9.2 Hz), 3.09-3.00 (1H, m), 1.32 (6H, d, J=6.6 Hz). MS m/z (M+H): 344.

Reference£º
Patent; FUJIFILM Corporation; FURUYAMA, Hidetomo; KURIHARA, Hideki; TERAO, Takahiro; NAKAGAWA, Daisuke; TANABE, Shintaro; KATO, Takayuki; YAMAMOTO, Masahiko; SEKINE, Shinichiro; MASHIKO, Tomoyuki; INUKI, Shinsuke; UEDA, Satoshi; US2015/322063; (2015); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

The important role of 1260670-05-0

The chemical industry reduces the impact on the environment during synthesis,1260670-05-0,3-Bromo-8-chloro-1,7-naphthyridine,I believe this compound will play a more active role in future production and life.

1260670-05-0, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3-Bromo-8-chloro-1,7-naphthyridine, cas is 1260670-05-0,the naphthyridine compound, it is a common compound, a new synthetic route is introduced below.

Step 1 To a 100 mL sealed tube was added 3~bromo-8-chloro-l,7-naphthyridine K-l (1.00 g, 4.10 mmol), 1,4-dioxane (15 mL) and NH3_H20 (40 mL) at room temperature. The mixture was sealed and stirred at 100 C for 15 h, then cooled and partitioned between water (150 mL) and EtOAc (100 mL). The aqueous layer was extracted with EtOAc (50 mL x 2) and the combined extracts were dried over sodium sulfate, filtered and concentrated in vacuo to afford compound K-2. MS for K-2: m/e = 224 and 226 (M+l).

Share a compound : 1309774-03-5

The chemical industry reduces the impact on the environment during synthesis,1309774-03-5,7-Bromo-2-chloro-1,5-naphthyridine,I believe this compound will play a more active role in future production and life.

1309774-03-5, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 7-Bromo-2-chloro-1,5-naphthyridine, cas is 1309774-03-5,the naphthyridine compound, it is a common compound, a new synthetic route is introduced below.

0421-1 A mixture of 7-bromo-2-chloro-1,5-naphthyridine (48 mg), bis(pinacolato)diboron (58 mg), a 1,1′-bis(diphenylphosphino)ferrocenepalladium(II) dichloride-dichloromethane complex (16 mg), potassium acetate (42 mg), and 1,4-dioxane (1.9 mL) was stirred at 100 C. for 2 hours. N-(4-bromopyridin-2-yl)acetamide (42 mg), sodium carbonate (45 mg), a bis(di-tert-butyl(4-dimethylaminophenyl)phosphine)dichloropalladium(II) (14 mg), 1,4-dioxane (0.3 mL), and water (0.19 mL)) were added to the reaction mixture, followed by stirring at 100 C. for 2 hours. The reaction mixture was cooled to room temperature, and purified by silica gel column chromatography (hexane-ethyl acetate-methanol), thereby obtaining N-(4-(6-chloro-1,5-naphthyridin-3-yl)pyridin-2-yl)acetamide (12.6 mg) as a pale brown solid. MS m/z (M+H): 299.

Introduction of a new synthetic route about 1309774-03-5

As a common heterocyclic compound, it belongs to naphthyridine compound, name is 7-Bromo-2-chloro-1,5-naphthyridine, and cas is 1309774-03-5, its synthesis route is as follows.

In a sealed tube, a mixture of 7-bromo-2-chloro-1,5-naphthyridine 4b (2.50 g, 10.3 mmol) and 28% aqueous ammonia solution (60 mL) in dioxane (60 mL) was heated at 140 C for 24 h. Then, the reaction mixture was allowed to cool at room temperature and water was added. The aqueous layer was extracted with ethyl acetate, dried over anhydrous sodium sulfate, filtrated and the solvent was removed under reduced pressure. The crude mixture was purified by column chromatography on silica gel eluting with dichloromethane, then dichloromethane/ethanol 98:2 to give compound 5 as a white solid (1.95 g, 85%); Rf=0.39 (CH2Cl2/EtOH, 96:4); mp: 168-169 C; 1H NMR (400 MHz, [D6]DMSO): delta=8.57 (d, J=2.1 Hz, 1H), 8.05 (d, J=2.1 Hz, 1H), 7.96 (d, J=9.1 Hz, 1H), 6.98 (br s, 2H), 6.04 (d, J=9.1 Hz, 1H); 13C NMR (100 MHz, [D6]DMSO): delta= 159.1, 145.1, 144.2, 138.6, 137.7, 133.8, 119.6, 116.9; MS (ESI) m/z (%): 224.0 (100) [M+H]+, 226.1 (100) [M+H+2]+.

Reference£º
Article; Defaux, Julien; Antoine, Maud; Loge, Cedric; Le Borgne, Marc; Schuster, Tilmann; Seipelt, Irene; Aicher, Babette; Teifel, Michael; Guenther, Eckhard; Gerlach, Matthias; Marchand, Pascal; Bioorganic and Medicinal Chemistry Letters; vol. 24; 16; (2014); p. 3748 – 3752;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

Brief introduction of 1309774-03-5

As a common heterocyclic compound, it belongs to naphthyridine compound, name is 7-Bromo-2-chloro-1,5-naphthyridine, and cas is 1309774-03-5, its synthesis route is as follows.

0157-1 A mixture of 7-bromo-2-chloro-1,5-naphthyridine (50 mg), 5-methoxypyridine-3-amine (25 mg), tris(dibenzylideneacetone)dipalladium(0) (19 mg), 4,5-bis(diphenylphosphino)-9,9-dimethylxanthene (24 mg), and cesium carbonate (33 mg) in 1,4-dioxane (1 mL) was stirred at 140 C. for 30 minutes using a microwave reaction apparatus. The reaction mixture was cooled to room temperature, the insolubles were filtered off using celite, and the obtained solution was purified by silica gel column chromatography (methanol-ethyl acetate, NH silica), thereby obtaining 6-chloro-N-(5-methoxypyridin-3-yl)-1,5-naphthyridine-3-amine (5.4 mg). MS m/z (M+H): 287.

Downstream synthetic route of 7-Chloro-1-cyclopropyl-6-fluoro-1,4-dihydro-4-oxo-1,8-naphthyridine-3-carboxylic Acid

The chemical industry reduces the impact on the environment during synthesis,100361-18-0,7-Chloro-1-cyclopropyl-6-fluoro-1,4-dihydro-4-oxo-1,8-naphthyridine-3-carboxylic Acid,I believe this compound will play a more active role in future production and life.

100361-18-0, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 7-Chloro-1-cyclopropyl-6-fluoro-1,4-dihydro-4-oxo-1,8-naphthyridine-3-carboxylic Acid, cas is 100361-18-0,the naphthyridine compound, it is a common compound, a new synthetic route is introduced below.

A SOLUTION OF AMINE 31 (612 MG, 1.57 MMOL) and triethylamine (0.7 mL, 5.0 MMOL) in ACETONITRILE (4 mL) was treated with 7-CHLORO-1-CYCLOPROPYL-6-FLUORO-4-OXO-1, 4-dihydro-naphthpyridine- 3-carboxylic acid (222 mg, 0.787 MMOL) under nitrogen and the reaction mixture was allowed to stir for 12 h. The resulting mixture was concentrated in vacuo, and the residue was washed with water (3 X 10 mL). The residue was allowed to dry for 15 min. The solid was collected, resuspended in methanol (5 mL) and the reaction mixture was treated with hydrazine (1 mL). After 5 min, the reaction mixture was warmed to reflux and the resulting mixture was allowed to stir for 1 h. The reaction mixture was concentrated in vacuo, diluted with water and the solids were collected by filtration. The off white product was washed with water (3 x 20 mL), allowed to dry overnight to afford the title compound 1 (40.4 mg, 13%). MS 391 (M+H).

Reference£º
Patent; JANSSEN PHARMACEUTICA, N.V.; WO2005/33108; (2005); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

New learning discoveries about 1260670-05-0

Step 1 To a stirred solution of intermediate A-10 (1.43 g, 3.36 mmol) and 3-bromo-8-chloro-l,7- naphthyridine (0.982 g, 4.03 mmol) in THF (34 ml) was added LHMDS in THF (11.8 ml, 11.8 mmol) at RT. The mixture was stirred at 45 C for 14 h, cooled, and diluted with dichloromethane (200 mL) and water (50 ml). The organic layers were collected, dried with magnesium sulfate, filtered, and concentrated. The residue was purified by column chromatography (120 g of Si02> 0-100% EtOAc in hexane) to provide example 17. MS for example 17: m/e = 532 and 534 (M+l).